UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Closed Thread
 
Thread Tools
Old 23rd Jun 2004, 4:24 pm   #1
wireless_paul
Hexode
 
wireless_paul's Avatar
 
Join Date: Mar 2003
Location: World Heritage Village of Saltaire, Shipley, West Riding of Yorkshire.
Posts: 324
Default Bulbs for Trio R-1000 receiver

Ok I admit I can be a bit slow sometime, but did not realise that this receiver should have 3 lamps (having used it for years without any lights!!). Two lamps are Clear (Meter + Dial) and one is Green (Mode). Understand these are 12V Grain of Wheat types and come with leads and connector. I have the part number, but do not know if that helps. Any idea where I can get these.
Thanks
Paul
wireless_paul is offline  
Old 23rd Jun 2004, 6:28 pm   #2
Tim
Nonode
 
Tim's Avatar
 
Join Date: Jan 2003
Location: Bradford on Avon, Wiltshire, UK.
Posts: 2,785
Default Re: Bulbs for Trio R-1000 receiver




Maplin stock something which may be suitable.

http://www.maplin.co.uk

Check stock number WQ13P??

These are clear bulbs, but if you need a green one you could use a green led with a 2.2 k resistor.
Cheers
Tim
__________________
"Nothing is as dangerous as being too modern;one is apt to grow old fashioned quite suddenly."
Tim is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 2:52 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.