|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
15th May 2004, 8:08 pm | #1 |
Retired Dormant Member
Join Date: Apr 2003
Location: Salt Spring Island, BC, Canada
Posts: 368
|
Testing PT15 (T1154) transmitting valves
I would like to test the PT15 output valves in my T1154. They have the old 5 pin base. I was considering making a lash-up test circuit for them but wondered if they could be checked in a standard receiving valve tester like the AVO?
|
15th May 2004, 9:10 pm | #2 |
Retired Dormant Member
Join Date: Mar 2003
Location: Bishop's Waltham, Hants, UK.
Posts: 939
|
Re: Testing PT15 transmitting valves
They can be done in the Valve Characteristic meters and I think, the CT160, but draw too much heater current for the "two panel" tester.
Jim. Last edited by Station X; 27th Dec 2004 at 9:49 pm. Reason: Import |