|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
11th Feb 2018, 11:19 am | #1 |
Retired Dormant Member
Join Date: Feb 2018
Location: Norfolk, UK.
Posts: 1
|
GEC SA9083 Tester (ex BT)
Good morning, my first post here!
I am looking for some information on my SA9083 tester. I have had it several years just using the ohms ranges. This all works fine, as does the M Ohms range. It will not however measure voltage on the 5V DC range, or the AC250V (Off) setting. I suspect an open circuit resistor or diode somewhere as I cannot measure any internal resistance through the meter terminals on these settings. Can the circuit diagram be purchased for this meter? If I knew the rotary switch connections it would help me to trace the circuit. I can't find any fuses inside. It was made around 1990 by GEC measurements (SEI) and is the version with the 9V battery. Thanks in advance. Mark. |
18th Feb 2018, 10:13 am | #2 |
Heptode
Join Date: Jan 2008
Location: Sheffield, South Yorkshire, UK.
Posts: 656
|
Re: GEC SA9083 Tester (ex BT)
Hi Mark,
I believe the information you need is available FOC from https://elektrotanya.com/robin-teste.../download.html
__________________
Martin BVWS member GQRP Club |