|
Vintage Tape (Audio), Cassette, Wire and Magnetic Disc Recorders and Players Open-reel tape recorders, cassette recorders, 8-track players etc. |
|
Thread Tools |
29th Mar 2015, 3:42 pm | #1 |
Nonode
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 2,801
|
Ferrograph Series 7 pinch roller size
Can someone advise me of the outer diameter of the pinch roller, as the
one on the unit I acquired has been lost, so no chance to remanufacture it. Thanks |
29th Mar 2015, 5:06 pm | #2 |
Octode
Join Date: Jun 2006
Location: St Osyth, Nr Clacton, Essex, UK.
Posts: 1,482
|
Re: Ferrograph Series 7 pinch roller size
Just measured one: 1.25"
Graham
__________________
Half my stuff is junk - trouble is, I don't know which half! Last edited by llama; 29th Mar 2015 at 5:09 pm. Reason: 32mm changed to 1.5 inches then 1.25" |
29th Mar 2015, 5:31 pm | #3 |
Nonode
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 2,801
|
Re: Ferrograph Series 7 pinch roller size
Thanks - I am sure I can modify something here. I believe it's a 722/4 from circa 1969,
with an excellent handbook. Luckily I already have some 40+ year old idlers, which have not become gooey, should I need them. Tony |
31st Mar 2015, 6:35 pm | #4 |
Hexode
Join Date: Jun 2011
Location: Glossop, Derbyshire, UK.
Posts: 487
|
Re: Ferrograph Series 7 pinch roller size
Hi There is a guy who remakes them for £25 it's David Durrant Mouse Hall
South Lane Houghton BN18 9LN I have the email if you want PM me
__________________
Any tool can be used as a hammer but a screwdriver makes the best chisel |
1st Apr 2015, 4:34 pm | #5 |
Nonode
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 2,801
|
Re: Ferrograph Series 7 pinch roller size
Thanks for the tip, but as I said I do not have one to remake, so would need either a new
or used one. I'll put it in the Wanted section. |
2nd Apr 2015, 5:53 pm | #6 |
Octode
Join Date: Jun 2006
Location: St Osyth, Nr Clacton, Essex, UK.
Posts: 1,482
|
Re: Ferrograph Series 7 pinch roller size
I think I should have a dud gooey one if only I can find it. One thing is certain, I won't have thrown it away!
Graham
__________________
Half my stuff is junk - trouble is, I don't know which half! |
2nd Apr 2015, 6:26 pm | #7 |
Octode
Join Date: Jun 2006
Location: St Osyth, Nr Clacton, Essex, UK.
Posts: 1,482
|
Re: Ferrograph Series 7 pinch roller size
Yeah, found it. It's solid brass and looks a bit like a bobbin that goes underneath on a sewing machine.
Graham
__________________
Half my stuff is junk - trouble is, I don't know which half! |
3rd Apr 2015, 10:36 am | #8 |
Nonode
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 2,801
|
Re: Ferrograph Series 7 pinch roller size
PM sent
|
8th Apr 2015, 11:17 am | #9 |
Nonode
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 2,801
|
Re: Ferrograph Series 7 pinch roller size
Thanks to Graham, I now have one to remanufacture via the contact mentioned above.
|
2nd May 2015, 11:08 am | #10 |
Nonode
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 2,801
|
Re: Ferrograph Series 7 pinch roller size
Thanks to everyone. Dave Durrant's excellent service has provided a good as new roller.
Can be closed. |