UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms


Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Closed Thread
Thread Tools
Old 24th Nov 2020, 1:58 am   #1
Join Date: Oct 2014
Location: West Midlands, UK.
Posts: 1,877
Default Loop memory.

Prompted by a post in the computer section.
Has anyone come across a programmed telehone where the called number was pre set by looping a wire through a set of magnets.
I met this in an old African rail station,where due to excess use of external calls the station staff could not make outgoing calls and needed some way of calling me for technical help.
Oldcodger is offline  
Closed Thread

Thread Tools

All times are GMT. The time now is 8:24 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.