|
Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets. |
|
Thread Tools |
26th Feb 2019, 5:49 pm | #1 |
Pentode
Join Date: Feb 2018
Location: Nottingham, Nottinghamshire, UK.
Posts: 229
|
Coil Winder Control Pedal
Hi,
I recently acquired an Elmer cn101c coil winder: The plug receptacle for the control pedal has 3 prongs and is circular ~ 10mm diameter and accepts a threaded round connector. Does anyone have any idea why it would have a 3 way rather than a 2 way connector? I'm unable to find any details / circuit diagrams for the machine online, how might I go about making a replacement? Thanks, Jonathan. |
26th Feb 2019, 6:13 pm | #2 |
Heptode
Join Date: Sep 2009
Location: Tonbridge, Kent, UK.
Posts: 686
|
Re: Coil Winder Control Pedal
Maybe they just used an available part so one pin is not connected to anything.
Have seen this on other things. |
26th Feb 2019, 6:41 pm | #3 |
Rest in Peace
Join Date: Apr 2012
Location: West London, UK.
Posts: 665
|
Re: Coil Winder Control Pedal
Reverse?
Some photos would be nice to view. The one provided is very small. Regards - Mike |
26th Feb 2019, 7:24 pm | #4 |
Pentode
Join Date: Feb 2018
Location: Nottingham, Nottinghamshire, UK.
Posts: 229
|
Re: Coil Winder Control Pedal
Thanks, sorry the winder is in storage at the moment, will post a better picture tomorrow. It
|
26th Feb 2019, 8:41 pm | #5 |
Dekatron
Join Date: Feb 2007
Location: Lynton, N. Devon, UK.
Posts: 7,087
|
Re: Coil Winder Control Pedal
It's just a simple on/off.
No idea why they used a 3-way connector - but I replaced one a few years ago and there are just 2 connections. |
7th Mar 2019, 2:51 pm | #6 |
Pentode
Join Date: Feb 2018
Location: Nottingham, Nottinghamshire, UK.
Posts: 229
|
Re: Coil Winder Control Pedal
Hi, Thanks,
Have managed to obtain the correct foot switch now. Last edited by AC/HL; 7th Mar 2019 at 3:35 pm. Reason: Thread split |