|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
28th Oct 2003, 8:10 pm | #1 |
Retired Dormant Member
Join Date: Dec 2002
Location: Wigmore, Kent, UK.
Posts: 102
|
Meter Movement Repair
Does anyone know where I can get a meter movement serviced. Its from an AVO VCM Mk3 (valve tester) and at some point has had a small ammount of water on its movement.
Thanks Maurice |
28th Oct 2003, 8:39 pm | #2 |
Retired Dormant Member
Join Date: Sep 2003
Location: Wrexham, North Wales, UK.
Posts: 799
|
Re: Meter Movement Repair
Try Bill Barton haven't got his address but he's based in Bolton phone No 01204 61106 he's a retired instrument engineer and doesn't charge a lot
Mike |
29th Oct 2003, 7:30 pm | #3 |
Retired Dormant Member
Join Date: Dec 2002
Location: Wigmore, Kent, UK.
Posts: 102
|
Re: Meter Movement Repair
Thanks Mike. Will give give Bill a try.
maurice |
29th Oct 2003, 8:05 pm | #4 |
Guest
Posts: n/a
|
Re: Meter Movement Repair
You could also try Dowding and Mills Calibration of Nottingham.
Don't have the number to hand-but easy to find via google. They specialise in AVO repairs. This would appear to be only the Nottingham branch (i.e. they have many branches but only the Nottingham branch has the expertise to repair meter movements.) |
29th Oct 2003, 8:07 pm | #5 |
Retired Dormant Member
Join Date: Dec 2002
Location: Wigmore, Kent, UK.
Posts: 102
|
Re: Meter Movement Repair
Thanks Rob
Handy thing to know. Will contact them as well. Maurice |