|
Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment |
|
Thread Tools |
25th Apr 2010, 10:01 am | #1 |
Retired Dormant Member
Join Date: Jun 2009
Location: Fleet, Hampshire, UK.
Posts: 29
|
Induction Loop for 700 series.
Good Morning All,
I have a seen advertised a GPO 3T receiver that apparently is a special type with inductive loop coil for compatibility with certain hearing aids. This caught my eye because my mother has recently had a pair "installed" and the line up to my old family home is pretty quiet (many many miles from the exchange). As most conversations usually end up with her totally getting the wrong end of the stick, I was looking a solution that would work well with her secondary 746. I have checked about a bit, but am no wiser than the 3T is of course the trimphone receiver. Does anyone have knowledge of this special series, and if it requires any specialist fitting? I am no expert on loop induction! Best regards, Tom |
25th Apr 2010, 11:15 am | #2 |
Rest in Peace
Join Date: Dec 2008
Location: Burton upon Trent, East Staffordshire, UK.
Posts: 1,686
|
Re: Induction Loop for 700 series.
|