|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
16th May 2018, 8:19 pm | #1 |
Tetrode
Join Date: Dec 2017
Location: Reigate, Surrey, UK.
Posts: 65
|
TS 700G Kenwood/Trio.
Hi
I have just received an old TS 700G which is basically working. It will not transmit because the 9 pin plug that fits in the VOX socket is missing. Does anyone know the connections for the plug. I have a circuit and can make deductions but would like to be sure before trying it out. Thanks in advance, Chris G4BYZ |
16th May 2018, 8:48 pm | #2 |
Dekatron
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,932
|
Re: TS 700G Kenwood/Trio.
Last 2 pins on r/hand-side joined together.Looking at the pins facing upwards . Pins 8 and 9 to be precise. Look at it like a valve base.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S |
17th May 2018, 10:08 am | #3 |
Tetrode
Join Date: Dec 2017
Location: Reigate, Surrey, UK.
Posts: 65
|
Re: TS 700G Kenwood/Trio.
Thanks Hamish,
I thought that was the case but wanted to proceed with caution. Chris G4BYZ |
17th May 2018, 10:39 am | #4 |
Dekatron
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,932
|
Re: TS 700G Kenwood/Trio.
Quite correct,I like certainty and these are a great rig,owned mine here since new.
Also the Nag144 Linear,which has not been used for years.Time to put up my Tennamast again.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S |