UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Other Discussions > Homebrew Equipment


Homebrew Equipment A place to show, design and discuss the weird and wonderful electronic creations from the hands of individual members.

Closed Thread
Thread Tools
Old 25th Feb 2016, 10:19 pm   #1
clay shooter
clay shooter's Avatar
Join Date: Jul 2014
Location: Northamptonshire, UK.
Posts: 96
Default 1 valve VHF receiver

I have the uncontrollable urge to build a 1 or 2 valve VHF receiver using easily obtainable parts. Can anyone recommend a suitable schematic?
I am not too bothered about it being high or low voltage, just easy to get the necessary parts. Thanks, Martin.
If it ain't bust don't fix it
clay shooter is offline  
Old 25th Feb 2016, 10:47 pm   #2
ThePillenwerfer's Avatar
Join Date: Mar 2011
Location: Sheffield, South Yorkshire, UK.
Posts: 1,236
Default Re: 1 valve vhf receiver

Quite a few here:

— Joe
"Experts are only good at one thing: explaining why something will not work!"

Last edited by ThePillenwerfer; 25th Feb 2016 at 10:48 pm. Reason: Hyper-link didn't work.
ThePillenwerfer is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 2:07 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.