UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms

Notices

Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Closed Thread
 
Thread Tools
Old 29th Oct 2017, 3:23 pm   #21
Refugee
Dekatron
 
Refugee's Avatar
 
Join Date: Apr 2012
Location: Worksop, Nottinghamshire, UK.
Posts: 5,549
Default Re: Help needed with bits!

Is the hook switch connected across the bell by mistake?
Refugee is offline  
Old 29th Oct 2017, 7:16 pm   #22
Kyle1974
Retired Dormant Member
 
Join Date: Oct 2017
Location: Rochdale, Greater Manchester, UK.
Posts: 8
Default Re: Help needed with bits!

Quote:
Originally Posted by Station X View Post
I would suggest that you have a problem with the phone's internal wiring/conversion then.

With the phone on-hook, all that should be connected to the line is the bell and that's in series with the capacitor in the master jack, so there's no DC path.
Thanks Graham - will keep persevering!
Kyle1974 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 2:36 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.