UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Closed Thread
 
Thread Tools
Old 16th May 2018, 8:19 pm   #1
Chris 1155
Triode
 
Join Date: Dec 2017
Location: Reigate, Surrey, UK.
Posts: 31
Default TS 700G Kenwood/Trio.

Hi
I have just received an old TS 700G which is basically working.
It will not transmit because the 9 pin plug that fits in the VOX socket is missing.
Does anyone know the connections for the plug. I have a circuit and can make deductions but would like to be sure before trying it out.
Thanks in advance,
Chris G4BYZ
Chris 1155 is offline  
Old 16th May 2018, 8:48 pm   #2
HamishBoxer
Dekatron
 
HamishBoxer's Avatar
 
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 6,242
Default Re: TS 700G Kenwood/Trio.

Last 2 pins on r/hand-side joined together.Looking at the pins facing upwards . Pins 8 and 9 to be precise. Look at it like a valve base.
__________________
G8JET BVWS Member and V.M.A.R.S
HamishBoxer is offline  
Old 17th May 2018, 10:08 am   #3
Chris 1155
Triode
 
Join Date: Dec 2017
Location: Reigate, Surrey, UK.
Posts: 31
Default Re: TS 700G Kenwood/Trio.

Thanks Hamish,
I thought that was the case but wanted to proceed with caution.
Chris G4BYZ
Chris 1155 is offline  
Old 17th May 2018, 10:39 am   #4
HamishBoxer
Dekatron
 
HamishBoxer's Avatar
 
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 6,242
Default Re: TS 700G Kenwood/Trio.

Quite correct,I like certainty and these are a great rig,owned mine here since new.

Also the Nag144 Linear,which has not been used for years.Time to put up my Tennamast again.
__________________
G8JET BVWS Member and V.M.A.R.S
HamishBoxer is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 9:58 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.