UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Audio (record players, hi-fi etc)

Notices

Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment.

Closed Thread
 
Thread Tools
Old 25th Nov 2012, 4:03 pm   #1
Audio1950
Dekatron
 
Join Date: Nov 2008
Location: Whittlesey, near Peterborough, Cambridgeshire, UK.
Posts: 3,749
Default HMV and Columbia soundbox identification

It has been suggested that a thread be started on this subject, so here goes.
I've started with some of the most common soundboxes from the two most famous gramophone makers, "His Master's Voice" and Columbia.

The first two pics show the HMV "Exhibition" and the No.4. Next, the side view of the No.4 shows the protruding rubber grommet at the back. This indicates that this is the infamous pot-metal backed version. On the earlier, brass backed version, the grommet lies flush with the surrounding metal. Beware of taking this as failsafe, howerever, as the two types of grommet can be interchanged.

Next comes the HMV 5B, considered by many as one of the best soundboxes ever. The 5A is externally identical, but the diaphram has a slightly different design round the outer edge.
Attached Thumbnails
Click image for larger version

Name:	P1020001.JPG
Views:	1223
Size:	53.3 KB
ID:	73212   Click image for larger version

Name:	P1020002.JPG
Views:	1175
Size:	62.2 KB
ID:	73213   Click image for larger version

Name:	P1020003.JPG
Views:	1139
Size:	55.6 KB
ID:	73214   Click image for larger version

Name:	P1020004.JPG
Views:	1408
Size:	59.6 KB
ID:	73215  

Last edited by Audio1950; 25th Nov 2012 at 4:15 pm.
Audio1950 is offline  
Old 25th Nov 2012, 4:11 pm   #2
Audio1950
Dekatron
 
Join Date: Nov 2008
Location: Whittlesey, near Peterborough, Cambridgeshire, UK.
Posts: 3,749
Default Re: HMV and Columbia soundbox identification

Now a few "Columbia"s.

First is the No.15. Available in nickel or chrome. Used extensively on the "plano-reflex" tonearms, where each bend is cut at 45 degrees.

Next two are the front and back of the No.8, made to swivel round in a straight tone arm to facillitate needle changing.

Finally, the front and back of a No.9.
Attached Thumbnails
Click image for larger version

Name:	P1020006.JPG
Views:	1153
Size:	53.1 KB
ID:	73219   Click image for larger version

Name:	P1020008.JPG
Views:	959
Size:	50.4 KB
ID:	73220   Click image for larger version

Name:	P1020009.JPG
Views:	866
Size:	51.7 KB
ID:	73221   Click image for larger version

Name:	P1020011.JPG
Views:	943
Size:	51.9 KB
ID:	73222   Click image for larger version

Name:	P1020012.JPG
Views:	802
Size:	48.6 KB
ID:	73223  

Audio1950 is offline  
Old 25th Nov 2012, 6:48 pm   #3
Boom
Retired Dormant Member
 
Join Date: Jan 2007
Location: Westbury, Wiltshire, UK.
Posts: 2,451
Default Re: HMV and Columbia soundbox identification

Thanks for that Barry. What are the practical differences of the Exhibition 2 and 4? I seem to have narrowed the required one down to one of those. As I have acoustic and electrical records would I need both?

Also could you confirm that the connecting pipe is 3/4" OD?

Thanks
Boom is offline  
Old 25th Nov 2012, 9:01 pm   #4
Audio1950
Dekatron
 
Join Date: Nov 2008
Location: Whittlesey, near Peterborough, Cambridgeshire, UK.
Posts: 3,749
Default Re: HMV and Columbia soundbox identification

The "Exhibition" and the No.2 had a much smaller, thicker diaphram, and a somewhat cruder stylus bar suspension. When electrical recording became the norm, a new soundbox had to be made to cope with the more heavily modulated grooves, hence the No.4. The No.4 is by far the better sounding of all three, but, as said before, the Exhibition will play anything, but if we're getting really technical, it will probably be at the expense of your more modern records, due to it's limited range of movement. How much of an effect this would have in practise, I can't tell you. I don't monitor my 78s that closely, I'm afraid. To sum up, the final choice is down to you, whether you want historical accuracy, or worry-free music!

I've just measured the O/D of the HMV arm that my Exhibition is fitted to, and it's slightly smaller than 3/4", it's 11/16".

Barry
Audio1950 is offline  
Old 25th Nov 2012, 9:21 pm   #5
Boom
Retired Dormant Member
 
Join Date: Jan 2007
Location: Westbury, Wiltshire, UK.
Posts: 2,451
Default Re: HMV and Columbia soundbox identification

You certainly know your stuff Barry. It is almost certainly an Exhibition that was originally fitted then.

Have been offered the black one with 'Exhibition' on the front with a new back chucked in but haven't a clue what to offer.
Boom is offline  
Old 25th Nov 2012, 9:52 pm   #6
Audio1950
Dekatron
 
Join Date: Nov 2008
Location: Whittlesey, near Peterborough, Cambridgeshire, UK.
Posts: 3,749
Default Re: HMV and Columbia soundbox identification

The only thing I can advise you on here is that I've just bought a new back for mine, and that alone was £12.00. Taking that into account, I'd say that around £50.00 would be a good offer, but be prepared to go a bit more.

Barry
Audio1950 is offline  
Old 18th Feb 2014, 8:56 pm   #7
knightley
Retired Dormant Member
 
Join Date: Jan 2014
Location: Woking & Kingswood S.Glos. UK.
Posts: 27
Default Re: HMV and Columbia soundbox identification

Further to Barry's information, there are 2 versions of the Columbia No.9. One with a domed front and one with a truncated cone front, the latter were also fitted to the plano-reflex tonearm in portables at least.

I have also added photos of a couple of diaphragms. An HMV No.5b and a Columbia/HMV No.15.
Attached Thumbnails
Click image for larger version

Name:	SAM_0049 copy.jpg
Views:	994
Size:	110.9 KB
ID:	89213   Click image for larger version

Name:	SAM_0050 copy.jpg
Views:	1044
Size:	118.3 KB
ID:	89214  
knightley is offline  
Old 18th Feb 2014, 11:21 pm   #8
knightley
Retired Dormant Member
 
Join Date: Jan 2014
Location: Woking & Kingswood S.Glos. UK.
Posts: 27
Default Re: HMV and Columbia soundbox identification

Here's what a plano-reflex tonearm looks like.
Attached Thumbnails
Click image for larger version

Name:	SAM_0054.jpg
Views:	668
Size:	41.4 KB
ID:	89220  
knightley is offline  
Old 4th May 2014, 2:34 pm   #9
knightley
Retired Dormant Member
 
Join Date: Jan 2014
Location: Woking & Kingswood S.Glos. UK.
Posts: 27
Default Re: HMV and Columbia soundbox identification

Before HMV the company was called The Gramophone and Typewriter Co. and the Exhibition soundboxes were imported from the USA, so here is a photo of an early model. These are sought after to go with early machines so are worth more than the HMV version.
Attached Thumbnails
Click image for larger version

Name:	SAM_0410.jpg
Views:	1077
Size:	89.3 KB
ID:	92392  
knightley is offline  
Old 4th May 2014, 3:30 pm   #10
knightley
Retired Dormant Member
 
Join Date: Jan 2014
Location: Woking & Kingswood S.Glos. UK.
Posts: 27
Default Re: HMV and Columbia soundbox identification

Here's another HMV Soundbox from the 30s.

The first 102 portables came with the No.16 soundbox, on which the front was swaged onto the back, so it cannot be easily repaired. HMV soon replaced this with the 5B.

Early 102s also had a pressed steel motorboard with a lithographed woodgrain pattern. The case was slightly lower (about 5mm) than the later ones with plywood motorboards which were leatherette faced for coloured cases or varnished for black cases. The steel motorboard models are much rarer than the plywood ones, but most people don't recognize the difference, so you could find a bargain. Remember leatherette or varnish = plywood and printed woodgrain = steel.

The most sought after 102s are the red leather covered ones with the gilt fittings.
Attached Thumbnails
Click image for larger version

Name:	SAM_0411.jpg
Views:	924
Size:	92.3 KB
ID:	92393   Click image for larger version

Name:	SAM_0412.jpg
Views:	908
Size:	80.5 KB
ID:	92394  

Last edited by knightley; 4th May 2014 at 3:54 pm.
knightley is offline  
Old 2nd Jul 2014, 4:53 pm   #11
knightley
Retired Dormant Member
 
Join Date: Jan 2014
Location: Woking & Kingswood S.Glos. UK.
Posts: 27
Default Re: HMV and Columbia soundbox identification

Addendum to last post.

Very late 102s have the case sides level with the motorboard and no cut out for the winding handle.

Also, even the black ones have leatherette covering to the motorboard.
knightley is offline  
Old 11th Oct 2015, 9:51 pm   #12
peter.sables
Rest in Peace
 
peter.sables's Avatar
 
Join Date: Dec 2007
Location: Doncaster, South Yorkshire, UK.
Posts: 385
Default Re: HMV and Columbia soundbox identification

Hi.

I've just been give this gem !. It works really well. The cabinet needs a little care though. Very loud. I got 12 records (Jass).
Attached Thumbnails
Click image for larger version

Name:	20151011_160437.jpg
Views:	668
Size:	59.2 KB
ID:	114182   Click image for larger version

Name:	20151011_160449.jpg
Views:	628
Size:	54.3 KB
ID:	114183   Click image for larger version

Name:	20151011_160456.jpg
Views:	527
Size:	56.6 KB
ID:	114184   Click image for larger version

Name:	head.jpg
Views:	718
Size:	60.9 KB
ID:	114185   Click image for larger version

Name:	hmv lable.jpg
Views:	547
Size:	96.9 KB
ID:	114186  

peter.sables is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 12:04 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.