UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Cabinet and Chassis Restoration and Refinishing

Notices

Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here.

Reply
 
Thread Tools
Old 11th Sep 2020, 9:24 pm   #1
AlanJohns
Diode
 
Join Date: Sep 2020
Location: New Plymouth, New Zealand
Posts: 3
Default Are these domed rivets?

Can anyone tell if these are double sided domed rivets used on the RCA LMI 32216 amps to attach the octals on both ends of the amp.
There are photos here that show them.

Or what they are and where I could buy them. Would they be like ones used in leather work?
Attached Thumbnails
Click image for larger version

Name:	LMI 1.jpg
Views:	103
Size:	45.5 KB
ID:	215466  
AlanJohns is offline   Reply With Quote
Old 11th Sep 2020, 9:52 pm   #2
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 17,170
Default Re: Are these domed rivets?

I doubt they're double sided domed rivets, as rivet setts would be needed to fit them rather than a simple press.

Most likely hollow ended rivets similar to these:-

https://www.ebay.co.uk/itm/5-32-4mm-...4AAOSw4-teN-KO
__________________
Graham. Forum Moderator

Keep the soldering iron hot.
Station X is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 5:34 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.