|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
9th May 2011, 6:42 am | #1 |
Pentode
Join Date: Oct 2008
Location: Essex, UK.
Posts: 108
|
Murphy V200a
Hello All,
I decided to get to work on my V200a after a break. A few weeks ago I changed all the caps, and apart from the dreaded 'service engineer' who had twiddled all the tuning slugs, God knows why, I had a reasonable but mis-aligned picture. After being on for half an hour there was a hiss and a bang and smoke poured out of the LOPT!!! Has anyone got a good LOPT available so that I can start again. If you have a scapped set, an IF strip (untouched) would also be of great help. Best wishes, Peter. |