UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms


Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Thread Tools
Old 19th Apr 2021, 8:37 pm   #1
Join Date: Sep 2005
Location: Seaford, East Sussex, UK.
Posts: 4,965
Default 312F paint mark to underside

I have been cleaning up and converting my newly acquired 312F and got stuck on some blobs of white/cream paint applied to the underside. It looks intentional and I wondered if it was a GPO 'end of use' mark? In any case it looks impossible to remove.
PJL is offline   Reply With Quote

Thread Tools

All times are GMT. The time now is 10:45 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.