UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 31st May 2016, 10:14 pm   #1
Gordonc
Pentode
 
Join Date: Sep 2011
Location: Consett, County Durham, UK.
Posts: 117
Default Heathkit multimeter

Hi guys,
I have a Heathkit multimeter model MM-1U which I am attempting to restore, however I cannot find a schematic for this particular model. I have found a schematic for model MM-1 though. Does anyone know if this schematic is the same as the Mm-1U?

Thanks
Gordon.
__________________
Gordonc
Gordonc is offline  
Old 31st May 2016, 10:17 pm   #2
HamishBoxer
Dekatron
 
HamishBoxer's Avatar
 
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,923
Default Re: Heathkit multimeter

Possibly worth a post under the "wanted" section.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S
HamishBoxer is offline  
Old 31st May 2016, 10:30 pm   #3
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: Heathkit multimeter

A 'U' suffix generally denotes a UK version of a Heathkit product.
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 1:48 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.