|
General Vintage Technology Discussions For general discussions about vintage radio and other vintage electronics etc. |
|
Thread Tools |
16th Oct 2020, 6:57 pm | #1 |
Heptode
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
|
IWATSU DMS 510 Memoryscope Probes
Good evening all,
I today acquired a scope by generous donation fron Bob (woodchips) and just need to find an instruction manual and a probe. Are these probes specific to the above scope or can I purchase any type of probe? Can anyone let me know what I need and where to purchase? Thank you. Brian |
17th Oct 2020, 7:32 am | #2 |
Nonode
Join Date: Jun 2016
Location: Bognor Regis, West Sussex, UK.
Posts: 2,288
|
Re: IWATSU DMS 510 Memoryscope Probes
Any standard scope probes should work with this. You will just need to adjust the trimmer in the probe for best square wave if you get a x10 type (or a switchable one).
Peter |
17th Oct 2020, 9:11 am | #3 |
Heptode
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
|
Re: IWATSU DMS 510 Memoryscope Probes
Thank you Peter.
Brian |
17th Oct 2020, 10:46 am | #4 |
Octode
Join Date: May 2010
Location: Grantham, Lincolnshire, UK.
Posts: 1,172
|
Re: IWATSU DMS 510 Memoryscope Probes
Brian. don't buy any probes!
This transfer has been active since Christmas, but virus intervened. I had some probes to go with the scope but in the time, and shifting around, they got separated. There are two X10 and one X1 probe which should do you. As is usual one of the spring clips is missing but two should do, one for signal, one for external trigger. PM sent |
17th Oct 2020, 11:03 am | #5 |
Heptode
Join Date: Nov 2018
Location: Staffordshire Moorlands, UK.
Posts: 595
|
Re: IWATSU DMS 510 Memoryscope Probes
Great, very much appreciated Bob.
Take care. Brian |