|
Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets. |
|
Thread Tools |
17th Dec 2019, 2:57 pm | #1 |
Dekatron
Join Date: Jun 2016
Location: London, UK.
Posts: 3,687
|
Ceramic capacitor identification
I recently got a nice mixed lot of parts on eBay and have gone through and filtered most of it into parts boxes. A little stuck on these ceramic capacitors though.
Does anyone know what series these are from? There are some Philips ones in same form in the lot (grey with black band across). Mostly interested in dielectric type i.e. X7R / C0G as I can get the value with an LCR meter. I assume CG based on the labelling but you never know! |
17th Dec 2019, 4:05 pm | #2 |
Dekatron
Join Date: Feb 2005
Location: West Cumbria (CA13), UK
Posts: 6,130
|
Re: Ceramic capacitor identification
I assume from the markings that the nominal value is 8.2nF (8200pF), though there's no harm in checking the actual value.
__________________
Mending is better than Ending (cf Brave New World by Aldous Huxley) |
17th Dec 2019, 4:32 pm | #3 |
Nonode
Join Date: Nov 2015
Location: Welwyn Garden City, Hertfordshire, UK.
Posts: 2,015
|
Re: Ceramic capacitor identification
If that is C0G it is physically far too small for 8200pF.
8p2 I can go with and the printing is a bit off. |
17th Dec 2019, 4:47 pm | #4 |
Dekatron
Join Date: Jun 2016
Location: London, UK.
Posts: 3,687
|
Re: Ceramic capacitor identification
Thanks both. It's definitely 8.2pF (comes up as 8.7pF on my LCR45).
So is C0G a possibility? |
17th Dec 2019, 5:26 pm | #5 |
Dekatron
Join Date: Feb 2005
Location: West Cumbria (CA13), UK
Posts: 6,130
|
Re: Ceramic capacitor identification
OK, I'll accept that's a "p" with it's tail docked.
__________________
Mending is better than Ending (cf Brave New World by Aldous Huxley) |
17th Dec 2019, 5:32 pm | #6 |
Dekatron
Join Date: Jun 2016
Location: London, UK.
Posts: 3,687
|
Re: Ceramic capacitor identification
Yeah the printing is really crap. Decided to build a simple colpitts oscillator with one of the caps soldered to some 4-5 inch wires, get it stable, plug it into my counter, set it in relative mode and then breath on it and see what happens. If it doesn't move a lot then it's C0G enough for me
I've got about 300 of these in different values hence the focus on it. |
17th Dec 2019, 6:00 pm | #7 |
Dekatron
Join Date: Dec 2007
Location: Haarlem, Netherlands
Posts: 4,203
|
Re: Ceramic capacitor identification
I think the purple band indicates the dielectric.
|
17th Dec 2019, 8:27 pm | #8 |
Moderator
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,902
|
Re: Ceramic capacitor identification
At that value ,C0G or NP0 are likely. The part would have to be very small if made in a high dielectric constant material. Though you do get some temperature compensating materials in small values
David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done |
17th Dec 2019, 10:02 pm | #9 |
Banned
Join Date: Jun 2015
Location: Mareeba, North Queensland, Australia
Posts: 2,704
|
Re: Ceramic capacitor identification
They are all Philips ceramic and very long lasting. CG or the top painted black are NPO.
other colours indicate different temp coefficients. Joe |
18th Dec 2019, 12:19 am | #10 |
Nonode
Join Date: Oct 2010
Location: Tintinara, South Australia, Australia
Posts: 2,343
|
Re: Ceramic capacitor identification
|
18th Dec 2019, 12:23 am | #11 |
Dekatron
Join Date: Jun 2016
Location: London, UK.
Posts: 3,687
|
Re: Ceramic capacitor identification
That's brilliant. Thanks for the info everyone. Very pleased with this lot of parts now! (had unused kemet wet tants, BC NP0/X7R MLCC's and lots of silver micas as well!)
|