|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
27th Jun 2021, 9:17 pm | #21 |
Octode
Join Date: May 2009
Location: Linkoping, Sweden
Posts: 1,463
|
Re: Service manual for Fluke PM6306 RCL Meter anyone?
Now I just need to buy a serial interface as none of my current PC's have it!
@mzspring: Can please you make the de-compiled code available somewhere so I can have a look at it?
__________________
Martin, Sweden |
28th Jun 2021, 12:16 am | #22 | |
Diode
Join Date: Jun 2021
Location: Beijing, China.
Posts: 3
|
Re: Service manual for Fluke PM6306 RCL Meter anyone?
Quote:
http://www.jicheng.net.cn/products/d..._pmeng0000.pdf CAL? CAL OFF (means calibration data not valid or lost) CAL ON;YY/MM/DD YY/MM/DD = Year/Month/DAY is the date of last calibration |
|
28th Jun 2021, 11:00 am | #23 |
Hexode
Join Date: Jun 2018
Location: Buckinghamshire, UK.
Posts: 383
|
Re: Service manual for Fluke PM6306 RCL Meter anyone?
Thanks mz. Yes, I'd quite forgotten that the 6306 programmer's manual covered that response.
So the question is what am I seeing? At first I thought the calibration data might be corrupted, but then checksum should have failed and the response would be 'CAL OFF'... Does your unit return the documented response? As I was concerned about the calibration data I ran self-test Program 9 which displayed: 1.0003 1-1 CAL The rotary control cycled through 6 pages: 1.0000 1-2 CAL 0.9984 1-3 CAL 1.0000 1-4 CAL 1.0000 1-5 CAL 1.0000 1-6 CAL Which seems like quite plausible calibration data. Cheers |
5th Jul 2021, 1:05 pm | #24 |
Octode
Join Date: May 2009
Location: Linkoping, Sweden
Posts: 1,463
|
Re: Service manual for Fluke PM6306 RCL Meter anyone?
My PM6303 shows:
0.9992 1-1 CAL 0.9994 1-2 CAL 0.9983 1-3 CAL 1.0001 1-4 CAL 1.0000 1-5 CAL 1.0001 1-6 CAL
__________________
Martin, Sweden |