UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Reply
 
Thread Tools
Old 12th Jul 2018, 10:13 pm   #1
Oldcodger
Octode
 
Join Date: Oct 2014
Location: West Midlands, UK.
Posts: 1,106
Default Programming a PBX with a laptop

Might be of help for anyone getting hold of one of the older Panasonic KXTD SERIES
This just came to mind ,when looking at an old Panasonic KXTD lap top program. For some time I had problems on an old laptop connecting to these ( KXTD 1232/816) using the maker's program, and Panasonic at time had no solution.
I found by trial and error that the default IRQ set in the program, may be in conflict with that set up in the laptop. Change IRQ and laptop talks to switch. Might work for other makes of switch that can be programmed using makers software.
Oldcodger is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 11:03 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.