UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Television Standards Converters, Modulators etc

Notices

Television Standards Converters, Modulators etc Standards converters, modulators anything else for providing signals to vintage televisions.

Reply
 
Thread Tools
Old 1st Jun 2018, 8:41 pm   #1
peter_scott
Octode
 
peter_scott's Avatar
 
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 1,840
Default Conversion Using PC Graphics Card

This has been reported previously but up until now I wasn't able to display the flicker that plagues the Baird 240 line / 25 Hz pictures because it gets lost when using video capture and YouTube.

I've now created an animated gif that looks very similar to the flicker on the actual television screen. That said, you really need to set your monitor display rate to 75Hz. rather than 60Hz.

Scroll down HERE

Peter
peter_scott is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 1:39 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.