Dynatron SRX25 Radiogram with Garrard 40B, Sound Issue - Page 5 - UK Vintage Radio Repair and Restoration Discussion Forum

Edward Huggins · 1st Sep 2017, 10:20 am

If you didn't quite understand Post #79, it might be best for you to request help from a Member here. There is a section for this on this site. The failure of one amplifier channel on these later made Dynatron units is a very common problem.

Kanyehobbitkind · 7th Sep 2017, 11:23 am

Quote:

Originally Posted by Edward Huggins

If you didn't quite understand Post #79, it might be best for you to request help from a Member here. There is a section for this on this site. The failure of one amplifier channel on these later made Dynatron units is a very common problem.

Where would I be able to search for this sorry? I'm not 100% sure how to navigate this website and it's a bit confusing.

Thank you
Kane

Station X · 7th Sep 2017, 11:27 am

Scroll up the page to post number 79?

Kanyehobbitkind · 7th Sep 2017, 2:31 pm

Quote:

Originally Posted by Station X

Scroll up the page to post number 79?

I meant the help from a member section

Thank you
Kane

Station X · 7th Sep 2017, 2:35 pm

Here:-

http://www.vintage-radio.net/forum/f...play.php?f=145

Kanyehobbitkind · 7th Sep 2017, 7:41 pm

I've also just noticed when I looked at it, if you can see in the picture, I also added the fuses to help narrow down the location of it. But I was following the wires from the left amp (as shown in image) where the white wire goes to numher 32, number 30 is totally free of anything. Should something be there?
Thank you
Kane

1st Sep 2017, 10:20 am	#81
Edward Huggins Dekatron Join Date: Sep 2015 Location: Southwold, Suffolk, UK. Posts: 8,340	Re: Dynatron SRX25 Radiogram with Garrard 40B, Sound Issue If you didn't quite understand Post #79, it might be best for you to request help from a Member here. There is a section for this on this site. The failure of one amplifier channel on these later made Dynatron units is a very common problem. __________________ Edward.

7th Sep 2017, 11:27 am	#83
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,289	Re: Dynatron SRX25 Radiogram with Garrard 40B, Sound Issue Scroll up the page to post number 79? __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.

7th Sep 2017, 2:35 pm	#85
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,289	Re: Dynatron SRX25 Radiogram with Garrard 40B, Sound Issue Here:- http://www.vintage-radio.net/forum/f...play.php?f=145 __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.

7th Sep 2017, 7:41 pm	#86
Kanyehobbitkind Retired Dormant Member Join Date: Aug 2017 Location: Middlesbrough, North Yorkshire, UK. Posts: 37	Re: Dynatron SRX25 Radiogram with Garrard 40B, Sound Issue I've also just noticed when I looked at it, if you can see in the picture, I also added the fuses to help narrow down the location of it. But I was following the wires from the left amp (as shown in image) where the white wire goes to numher 32, number 30 is totally free of anything. Should something be there? Thank you Kane Attached Thumbnails