|
|
|
|
|||||||
| Vintage Tape (Audio), Cassette, Wire and Magnetic Disc Recorders and Players Open-reel tape recorders, cassette recorders, 8-track players etc. |
 |
|
|
Thread Tools |
2nd Dec 2021, 10:24 am
|
#1 |
|
Diode
Join Date: Dec 2021
Location: Hull, East Riding of Yorkshire, UK.
Posts: 2
|
Phillips N4308 part names or sources
Hello all, All cleaned up and new belts fitted and works well. However the clip that holds on the tape counter pulley wheel flew off when removing it never to be seen again! Also the rubber washers on the four corners could do with replacing. Could anyone give me the names of these items please. As you can see it is not a normal C clip (I might try a blob of hot glue) and the rubber washers have a groove in the middle.
Rich |
|
|
2nd Dec 2021, 10:48 am
|
#2 |
|
Dekatron
Join Date: Jul 2008
Location: Kington, Herefordshire, UK.
Posts: 3,670
|
Re: Phillips N4308 part names or sources
Welcome aboard! An ordinary circlip would do for the counter pulley and the things in the deckplate are grommets, widely available on auction sites.
|
|
|
|
2nd Dec 2021, 2:08 pm
|
#3 |
|
Diode
Join Date: Dec 2021
Location: Hull, East Riding of Yorkshire, UK.
Posts: 2
|
Re: Phillips N4308 part names or sources
Many thanks for your reply Ted
|
|
|
|
2nd Dec 2021, 8:13 pm
|
#4 |
|
Dekatron
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 6,603
|
Re: Phillips N4308 part names or sources
An E Clip (type of circlip) would also suffice.
David |
|
|
