Dansette Conquest/RG31 Brass Strip - UK Vintage Radio Repair and Restoration Discussion Forum

RexMonday · 20th Mar 2019, 5:47 pm

Hi all

I’m currently refurbishing my first Dansette (RG31), and was hoping you could give me some advice.
I’ve removed the speaker grille, and re-covered, however, I can’t remember how it goes back in.
Does the bottom of the speaker grill overhang on the outside? If this is the case, then presumably the ‘join’ is covered by a brass strip

Firstly, does anyone know where I can buy said strip, and secondly, can anyone advise how it fits in relation to the speaker grille

Thanks
Rex

20th Mar 2019, 5:47 pm	#1
RexMonday Retired Dormant Member Join Date: Jan 2019 Location: London, UK. Posts: 5	Dansette Conquest/RG31 Brass Strip Hi all I’m currently refurbishing my first Dansette (RG31), and was hoping you could give me some advice. I’ve removed the speaker grille, and re-covered, however, I can’t remember how it goes back in. Does the bottom of the speaker grill overhang on the outside? If this is the case, then presumably the ‘join’ is covered by a brass strip Firstly, does anyone know where I can buy said strip, and secondly, can anyone advise how it fits in relation to the speaker grille Thanks Rex