The Thanks Thread - Page 69 - UK Vintage Radio Repair and Restoration Discussion Forum

HamishBoxer · 8th Dec 2020, 11:21 am

Thank to Graham (Station X) for very promptly sorting out an issue on Monday.

factory · 12th Dec 2020, 10:50 pm

A big thank you to Anthony for one of the pair of HP 540B transfer oscillators that were offered & for print outs of the relevant manuals, they should be a great help for getting it going again.

Also thank you to Rileyman for a pair of E1T valves & sockets, probably the closest I'll get to owning an original counter that uses them.

David

DMcMahon · 19th Dec 2020, 12:31 pm

Thankyou to chriswood1900 for supplying the Grinder/Buffer that safely arrived yesterday, will be put to good use.

David

Uncle Bulgaria · 20th Dec 2020, 2:36 am

I second DMcMahon - chriswood1900's objects arrived impeccably packaged and perfectly safely, despite the delivery man's grumbling about their weight. I know how long packaging like that takes, and am suitably grateful! I hope the MCR21 project continues apace in the new year.

OldTechFan96 · 21st Dec 2020, 12:56 pm

A big thank you to Neutrino for sending me some suitable rubber grommets so I can finally start to finish off my Ultra Model 50.

DMcMahon · 30th Dec 2020, 12:13 pm

Many thanks to David G4EBT for supplying the 0.1uF Mustard capacitors, they will be put to good use.

David

John M0GLN · 30th Dec 2020, 12:26 pm

Quote:

Originally Posted by DMcMahon

Many thanks to David G4EBT for supplying the 0.1uF Mustard capacitors, they will be put to good use.

David

I'll second that, mine arrived probably less than 24 hrs after posting and within 3 days of my original PM to David.

John

Bear2Biker · 30th Dec 2020, 4:45 pm

Many thanks to AdrianH for the restoration work on the Solartron CD814-2 oscilloscope and offering it here, now nestling amongst several friends.

Paul Bottrill

Longespee · 31st Dec 2020, 12:35 pm

David G4EBT, many thanks for the Mustard's, expertly packaged, all arrived safely and will be under the iron very soon.

Best,

Sean.

Viscount · 1st Jan 2021, 8:21 pm

I would like to thank all for you help during 2020 and a very difficult year, what a great site, unrivalled I reckon.

AdrianH · 4th Jan 2021, 3:12 pm

Thanks to Alan snowman_al for the 22 pots, should enable variable controls for width and height on my simple home made TV.

Adrian

gezza123 · 6th Jan 2021, 3:42 pm

Thank you (David Factory) for taking time out to find and sending me a line switch for my HP8601a
many thanks gezza123

DMcMahon · 9th Jan 2021, 12:04 pm

Thank you to whiskas (Rob) for the numerous Reel to Reel manuals that arrived today.

David

Cobaltblue · 10th Jan 2021, 4:26 pm

A big thank you to David (davidh1041) for the B7G valve holders.

A very generous offer.

I have some upcoming projects using B7G battery valves so absolutely ideal.

Cheers

Mike T

terrybull · 13th Jan 2021, 3:16 pm

My thanks to Ian, Northyorks1 who saw I’d missed out on an offered post recently and kindly sent me a Grundig with the best packing I’ve ever know. Extremely kind. Sincere thanks.

8th Dec 2020, 11:21 am	#1361
HamishBoxer Dekatron Join Date: Aug 2007 Location: W.Butterwick, near Doncaster UK. Posts: 7,708	Re: The Thanks Thread Thank to Graham (Station X) for very promptly sorting out an issue on Monday. __________________ G8JET BVWS Member and V.M.A.R.S

12th Dec 2020, 10:50 pm	#1362
factory Heptode Join Date: Jul 2009 Location: Cheshire, UK. Posts: 711	Re: The Thanks Thread A big thank you to Anthony for one of the pair of HP 540B transfer oscillators that were offered & for print outs of the relevant manuals, they should be a great help for getting it going again. Also thank you to Rileyman for a pair of E1T valves & sockets, probably the closest I'll get to owning an original counter that uses them. David

19th Dec 2020, 12:31 pm	#1363
DMcMahon Nonode Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 2,688	Re: The Thanks Thread Thankyou to chriswood1900 for supplying the Grinder/Buffer that safely arrived yesterday, will be put to good use. David

20th Dec 2020, 2:36 am	#1364
Uncle Bulgaria Heptode Join Date: May 2016 Location: Cornwall, UK. Posts: 977	Re: The Thanks Thread I second DMcMahon - chriswood1900's objects arrived impeccably packaged and perfectly safely, despite the delivery man's grumbling about their weight. I know how long packaging like that takes, and am suitably grateful! I hope the MCR21 project continues apace in the new year.

21st Dec 2020, 12:56 pm	#1365
OldTechFan96 Heptode Join Date: Jul 2017 Location: Newcastle Upon Tyne, Tyne & Wear, UK. Posts: 682	Re: The Thanks Thread A big thank you to Neutrino for sending me some suitable rubber grommets so I can finally start to finish off my Ultra Model 50.

30th Dec 2020, 12:13 pm	#1366
DMcMahon Nonode Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 2,688	Re: The Thanks Thread Many thanks to David G4EBT for supplying the 0.1uF Mustard capacitors, they will be put to good use. David

30th Dec 2020, 4:45 pm	#1368
Bear2Biker Triode Join Date: Jan 2011 Location: Bradford, West Yorkshire, UK. Posts: 18	Re: The Thanks Thread Many thanks to AdrianH for the restoration work on the Solartron CD814-2 oscilloscope and offering it here, now nestling amongst several friends. Paul Bottrill __________________ Bear2Biker

31st Dec 2020, 12:35 pm	#1369
Longespee Tetrode Join Date: Jun 2009 Location: Leominster, Herefordshire, UK. Posts: 99	Re: The Thanks Thread David G4EBT, many thanks for the Mustard's, expertly packaged, all arrived safely and will be under the iron very soon. Best, Sean.

1st Jan 2021, 8:21 pm	#1370
Viscount Hexode Join Date: Jan 2018 Location: Folkestone, Kent, UK. Posts: 362	Re: The Thanks Thread I would like to thank all for you help during 2020 and a very difficult year, what a great site, unrivalled I reckon.

4th Jan 2021, 3:12 pm	#1371
AdrianH Heptode Join Date: Mar 2020 Location: Blackburn with Darwen, Lancashire, UK. Posts: 566	Re: The Thanks Thread Thanks to Alan snowman_al for the 22 pots, should enable variable controls for width and height on my simple home made TV. Adrian __________________ Ask questions and learn, or try to!

6th Jan 2021, 3:42 pm	#1372
gezza123 Heptode Join Date: Mar 2010 Location: Eastham, Wirral, Merseyside, UK. Posts: 752	Re: The Thanks Thread Thank you (David Factory) for taking time out to find and sending me a line switch for my HP8601a many thanks gezza123

9th Jan 2021, 12:04 pm	#1373
DMcMahon Nonode Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 2,688	Re: The Thanks Thread Thank you to whiskas (Rob) for the numerous Reel to Reel manuals that arrived today. David

10th Jan 2021, 4:26 pm	#1374
Cobaltblue Moderator Join Date: Dec 2010 Location: Exeter and Poole, UK. Posts: 4,307	Re: The Thanks Thread A big thank you to David (davidh1041) for the B7G valve holders. A very generous offer. I have some upcoming projects using B7G battery valves so absolutely ideal. Cheers Mike T __________________ Don't care if it was a bargain why's it in my kitchen Mike T BVWS member. www.cossor.co.uk

13th Jan 2021, 3:16 pm	#1375
terrybull Octode Join Date: Jan 2011 Location: Newark, Nottinghamshire, UK. Posts: 1,426	Re: The Thanks Thread My thanks to Ian, Northyorks1 who saw I’d missed out on an offered post recently and kindly sent me a Grundig with the best packing I’ve ever know. Extremely kind. Sincere thanks.