|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
30th Jul 2022, 3:26 pm | #1 |
Triode
Join Date: Jul 2022
Location: Northampton, Northamptonshire, UK.
Posts: 22
|
RCA AR88 Comms Receiver. Painting the case.
What is the best way to repaint the metal case-would ordinary black Hammerstein be ok?
Thanks Scotch24A |
30th Jul 2022, 4:24 pm | #2 |
Dekatron
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 14,007
|
Re: RCA AR88 Comms Receiver. Painting the case.
The best thing is to strip it then prime and respray with "crackle" finish paint available from classic-car-restoration places like Frost.
https://www.frost.co.uk/vht-black-wrinkle-finish-310ml/
__________________
I'm the Operator of my Pocket Calculator. -Kraftwerk. |
30th Jul 2022, 5:36 pm | #3 |
Nonode
Join Date: Jun 2007
Location: Coulsdon, London, UK.
Posts: 2,169
|
Re: RCA AR88 Comms Receiver. Painting the case.
I think 'Wrinkle' or 'Ripple' finish is the best description for the paint type normally applied to military equipment. Also called 'Crinkle' by some.
A search for 'Crackle' finish will sometimes show a paint effect like a dried up mud pool. This was used on some Hallicrafters SX-28 receivers. |
1st Aug 2022, 3:49 pm | #4 |
Triode
Join Date: Jul 2022
Location: Northampton, Northamptonshire, UK.
Posts: 22
|
Re: RCA AR88 Comms Receiver. Painting the case.
Thanks
Scotch24A |
1st Aug 2022, 6:17 pm | #5 |
Moderator
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,902
|
Re: RCA AR88 Comms Receiver. Painting the case.
I had mine bead blasted and then stove enamelled (silver hammer) professionally back in the sixties. Not original but still looks great. I had the advantage of an early set with engraved front panel.
David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done |