UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment
Reload this Page Copper oxide v Germanium Rectifier in AVO
Register FAQ Forum Rules Calendar

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 11th Jan 2018, 9:58 pm   #1
The Philpott
Dekatron
 
The Philpott's Avatar
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 4,106
Default Copper oxide v Germanium Rectifier in AVO
Is the change to Germanium rectifiers in later AVOmeters an advantage regarding accuracy when testing mains frequency of 50Hz? ...Or is it only relevant with higher frequencies?

Thankyou
The Philpott is offline  
Closed Thread

« Previous Thread | Next Thread »



All times are GMT +1. The time now is 7:16 am.

Contact Us - Home - Forum Rules, Privacy & Disclaimer - Top

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.