UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Reply
 
Thread Tools
Old 22nd Jul 2021, 4:32 pm   #21
Welsh Anorak
Dekatron
 
Welsh Anorak's Avatar
 
Join Date: Apr 2005
Location: North Wales, UK.
Posts: 5,473
Default Re: What is the worst VCR to work on?

Changing the Charlie pinchroller was a doddle if you didn't follow the manual. Replacement required a 9v battery and a long screwdriver used as a crowbar... Five minutes and it was done!

Pattern parts for Philips Echo and Charlie VCRs were actually better than the manufacturer supplied parts that would decompose in their little plastic box.
Luckily I did very few V2000s and played enough with old N1500 and 1700s to know I'd had a lucky escape.
__________________
Glyn
www.gdelectronics.wales
Welsh Anorak is offline   Reply With Quote
Old 22nd Jul 2021, 6:47 pm   #22
gallowfields
Pentode
 
Join Date: Feb 2018
Location: Durham, County Durham, UK.
Posts: 120
Default Re: What is the worst VCR to work on?

got to agree with glyn on the charly deck, once you knew them easy. pinch roller fastest time to fit one 12 seconds. dis the loading motor power it from seperate supply watch the pinch go round to the left a little push down the locating cog slide out the old pinch and in with the new let go of the locating cog reverse polarity and pinch is back to rest first shown to me by chs rep many moons ago just one of the tips he passed on his rounds [alan round ]
gallowfields is offline   Reply With Quote
Old 22nd Jul 2021, 7:14 pm   #23
its ur aerial
Pentode
 
its ur aerial's Avatar
 
Join Date: May 2009
Location: Ryde, Isle of Wight, UK.
Posts: 170
Default Re: What is the worst VCR to work on?

Obviously the Amstrad twin Tape machine and it various clones, were an absolute pile of excrement, the Sanyo Fisher Machines with the Horseshoe Idler were not easy, but once you done a few, were not too bad, the modified chassis helped, I had forgotten about that, good memory Glyn, well done !
And then of course the G and Charlie Decks But a friend of mine who worked for Panasonic, thought the were a piece of cake As a matter of interest, I understand they are still used in Commercial Passenger Air Craft for the inflight entertainment system.
Best VCR, 3V30, gets my vote.

Ken, G6HZG.
__________________
Life is not Hollywood, life is Cricklewood.
its ur aerial is offline   Reply With Quote
Old 22nd Jul 2021, 7:53 pm   #24
jayceebee
Heptode
 
jayceebee's Avatar
 
Join Date: Jun 2007
Location: Durham, County Durham, UK.
Posts: 525
Default Re: What is the worst VCR to work on?

Surprised no one has mentioned Sony, I can only speak of their VHS machines but they foisted one or two horrors on us. The worst one by far was the SLV-E40, this heap used an even cheaper and nastier version of the deck design used in many Amstrads.

No hope of electronic fault finding without the extension leads and even then it was a balancing act. Performance was terrible, any tape recorded with less than perfect heads showed lots of noise and much interference from the SMPS. Truly awful machine and not worthy of the Sony name.

John.
jayceebee is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 6:35 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.