UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Reply
 
Thread Tools
Old 11th Jan 2020, 2:18 pm   #1
tonyvirago
Diode
 
Join Date: Nov 2016
Location: Haslingden, Lancashire, UK.
Posts: 3
Smile TTI Thurlby Thandar 1706 DMM inop most ranges.

Bought one off Gumtree. Worked on continuity and not much else. On the pcb are R1 R2 R3. Big jobs. All looked toasted. 2 measured 1k. R2 was open. Put a 1k in there and all worked! Got the manual off TTI and found R2 should be 470K. Put proper value in and all fine. They are all on the input area needless to say. Very pleased. And I have the pdf manual. Tony
tonyvirago is offline   Reply With Quote
Old 11th Jan 2020, 9:50 pm   #2
Sinewave
Octode
 
Sinewave's Avatar
 
Join Date: May 2016
Location: Oxfordshire/Bucks borders, UK.
Posts: 1,037
Default Re: TTI Thurlby Thandar 1706 DMM inop most ranges.

Not a bad result at all. Wonder if the meter went over current with the wrong fuse in at some point?
__________________
Avometer, vintage Fluke and Marconi collector.
Sinewave is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 12:25 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.