UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment


Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
Thread Tools
Old 14th Feb 2018, 6:54 pm   #1
David Simpson
Join Date: Mar 2008
Location: Aberdeen, UK.
Posts: 1,721
Default Marconi 995A/5 Sig Gen Modulation Interference

Just wondering - are there any 995A/5 buffs out there who have experienced AM modulation remaining when FM is selected on S1. I.e. 50% AM modulation (meter fsd) set, but approx. 25% remains when set to Int. FM when scoping 20MHz 100mV o/p profile. Note, modulation meter(Racal Dana 9009A) had given correct AM & FM settings of 50% AM, & 5Kc/s & 15 Kc/s Dev.

Regards, David
David Simpson is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 10:50 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.