UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)


Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Thread Tools
Old 8th Apr 2020, 7:55 am   #1
Nicolas France
Join Date: Apr 2020
Location: Guérigny, France
Posts: 3
Default BSR turntable autochanger spindle.

Good morning from France! I hope you are all well, after a couple of messages I was advised to post here.

I had the chance to get a Waltham music center ref STM70, it is equipped with a BSR turntable.
Everything works fine but there is a part missing, the spindle, you can see it on the pictures. For the moment I'm using a plastic wall plug to play my records and I intend to print a 3D item, but I wish I could find a more suitable solution, because I can't use the auto launch function, hence this post.

Apparently I own a BSR C123R, but please check the pictures if there is any doubt. If the autochanger spindle is fun, a standard one would also be great.

Thanks a lot in advance for your help!

Best regards from France

Attached Thumbnails
Click image for larger version

Name:	IMG_20200405_221550.jpg
Views:	40
Size:	108.4 KB
ID:	202480   Click image for larger version

Name:	IMG_20200405_221045.jpg
Views:	39
Size:	105.2 KB
ID:	202481   Click image for larger version

Name:	IMG_20200405_221038.jpg
Views:	39
Size:	80.8 KB
ID:	202482  
Nicolas France is offline   Reply With Quote
Old 11th Apr 2020, 3:49 pm   #2
tracypaper's Avatar
Join Date: Aug 2010
Location: Beeston, Leeds, West Yorkshire, UK.
Posts: 1,059
Default Re: BSR turntable autochanger spindle.

Hello Nicolas.
I have a few of these and can let you have one for the price of postage.
There is also two sizes to choose from but looking at your player I have decided to let you have the smaller one so as not to foul the perspex lid.
Please PM (Private Message) me with address details etc.
tracypaper is offline   Reply With Quote

Thread Tools

All times are GMT +1. The time now is 9:50 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.