UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Repair and Restoration Services Offered

Notices

Repair and Restoration Services Offered If you offer repair or restoration services please post a thread here.

Closed Thread
 
Thread Tools
Old 22nd Mar 2020, 6:03 pm   #1
Electronpusher0
Heptode
 
Join Date: Jun 2016
Location: Bognor Regis, West Sussex, UK.
Posts: 947
Default AVO meter replacement glass cut to size.

I intially offered this in the "Sets parts and service information offered" section but am posting here at the suggestion of moderator Bill.

There have been several threads recently enquiring about replacement glass for AVO meters.
As making stained glass panels is another hobby of mine, I am a reasonably competent glass cutter.
I also needed to make a glass for an AVO 8 Mk3 I own so have been practicing making a couple of replacement glasses from old picture frame glass (as suggested on another thread). I attach photos of the one I made for my AVO (after fitting) and the spare I made.

I am now confident I can make these and decided to offer to make them to order on the forum.

They cost 5 including postage within the UK, I can ship abroad but the postage will be at cost.

I have templates for the AVO 7, early AVO 8 and 9, Model D, Model 46A and the AVO 8 Mk 5 (the plastic case version which uses a different glass)
I also have a template for the glass for the 2 panel AVO valve tester.
Any other sizes I will need a template supplied, either posted or scanned but if scanned please include the dimensions so I can print it the correct size.

Please be careful if you buy any as they will have very sharp edges, it is possible to dull the edge with a file but you risk setting up a stress point that can crack later.

I can cut straight lines and curves and indeed recently cut a full circle to fit a compass but cannot cut holes at this time. If there is a demand for glass with holes I will look into how I can do this.

Peter
Attached Thumbnails
Click image for larger version

Name:	IMG_20200314_112031[1].jpg
Views:	86
Size:	119.0 KB
ID:	201412   Click image for larger version

Name:	IMG_20200314_114351[1].jpg
Views:	85
Size:	22.5 KB
ID:	201413   Click image for larger version

Name:	IMG_20200319_100604[1].jpg
Views:	88
Size:	15.3 KB
ID:	201414  
Electronpusher0 is online now  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 11:58 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.