UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Reply
 
Thread Tools
Old 18th Oct 2019, 10:46 pm   #1
Libratron
Pentode
 
Libratron's Avatar
 
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 181
Default Sony SL-C5E/UB Belts measurement.

Hi at all,

I'm restoring a SL-C5E.
anyone know the, belt kit measurement for a Sony SL-C5?
Diameter x Section in mm?

Thanks at all,

Libra
Libratron is offline   Reply With Quote
Old 18th Oct 2019, 11:11 pm   #2
simpsons
Heptode
 
Join Date: Feb 2007
Location: Harrow, London, UK.
Posts: 505
Default Re: Sony SL-C5E/UB Belts measurement.

Hi Libra

You can buy a set of belts on Ebay.de for 25 Euros. Search Sony sl-c7 belts.

Chris
simpsons is offline   Reply With Quote
Old 19th Oct 2019, 1:25 am   #3
Libratron
Pentode
 
Libratron's Avatar
 
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 181
Default Re: Sony SL-C5E/UB Belts measurement.

Yes, i see, but in the past i haved bad experience,
with this ebay belt kit (wrong measured too tight).

Libra
Libratron is offline   Reply With Quote
Old 19th Oct 2019, 8:38 am   #4
simpsons
Heptode
 
Join Date: Feb 2007
Location: Harrow, London, UK.
Posts: 505
Default Re: Sony SL-C5E/UB Belts measurement.

Hi Libra

Sorry to hear this but your comments may have saved other members similar disappointment. Luckily another member posted details from the German supplier Safferthal.de. I have checked their site and detail below the SONY C7 belt spec.

Safferthal Part VR70, König Electronic article number: 7509 cost €19 plus p&p NOT IN STOCK

1 Flat Belt (93.0 x 0.43 x 6.0 mm) for Capstan
1 Square Belt (103.0 x 1.0 x 1.0 mm) for Counter
1 Square Belt (95.0 x 1.2 x 1.2 mm) for Eject
1 four- shoulder belt (87.0 x 2.0 x 2.0 mm) for Fast Wind
1 four-belt (32.0 x 1.2 x 1.2 mm) for Fast Wind
1 square belt (118.0 x 2.1 x 2.1 mm) for Threading

Should you find a suitable supplier, please share the information.

Best of luck

Chris
simpsons is offline   Reply With Quote
Old 19th Oct 2019, 4:59 pm   #5
Libratron
Pentode
 
Libratron's Avatar
 
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 181
Default Re: Sony SL-C5E/UB Belts measurement.

Thanks so much Simpsons.
Yes, i spend too much on this ebay kit (VTR and Cassette).
And i'm tired to waste time and money.

Thanks again.

Libra
Libratron is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 8:50 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.