UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Closed Thread
 
Thread Tools
Old 15th Oct 2019, 4:29 pm   #1
Dick Glennon
Hexode
 
Join Date: Oct 2006
Location: Edenderry, Republic of Ireland.
Posts: 428
Default Pye PJ500 dial cord and cursor.

Hi again, The pj 500 did not have a dial chord or cursor but it has a piece of dial chord on a spring which runs parallel with the dial chord when it is strung and in position. I wonder if this chord guides the cursor and keeps it from sagging as the dial light holders are in the way on top. Dick.
Dick Glennon is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 5:12 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.