|
|
|
|
|||||||
| Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
 |
|
|
Thread Tools |
8th Dec 2019, 9:27 pm
|
#1 |
|
Heptode
Join Date: Aug 2016
Location: Dumfries, Scotland, UK.
Posts: 549
|
EMOR globe mains transformer trouble
Just checking mains tx on my Emor is dead I have a dead chassis from a GEC BC4070 am I right in thinking this chassis transformer would do the job ?
|
|
|
8th Dec 2019, 10:45 pm
|
#2 |
|
Dekatron
Join Date: Sep 2005
Location: Seaford, East Sussex, UK.
Posts: 5,997
|
Re: EMOR globe mains transformer trouble
Looks OK to me. 5V 2A rectifier and more valves than the Emor. What's up with the original?
|
|
|
|
8th Dec 2019, 10:52 pm
|
#3 |
|
Heptode
Join Date: Aug 2016
Location: Dumfries, Scotland, UK.
Posts: 549
|
Re: EMOR globe mains transformer trouble
It had at some point made a lovely waxy puddle in the case and the primary had snuffed it
|
|
|
|
9th Dec 2019, 12:59 am
|
#4 |
|
Dekatron
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,535
|
Re: EMOR globe mains transformer trouble
There's always the "Dinning" option if you want to avoid any possible chassis bashing to make a "stranger" fit.
__________________
....__________ ....|____||__|__\_____ .=.| _---\__|__|_---_|. .........O..Chris....O |
|
|
|
9th Dec 2019, 10:32 am
|
#5 |
|
Heptode
Join Date: Aug 2016
Location: Dumfries, Scotland, UK.
Posts: 549
|
Re: EMOR globe mains transformer trouble
Everyone one I've ever seen is slightly different I wouldn't think it'll matter too much and I want it sorted quickly
|
|
|
|
9th Dec 2019, 5:12 pm
|
#6 |
|
Heptode
Join Date: Aug 2016
Location: Dumfries, Scotland, UK.
Posts: 549
|
Re: EMOR globe mains transformer trouble
Ok I have a Cossor transformer from a 497ac/e this has 5v 6.3v and centre tapped HT however this is 370v a side is this likely to be a bit much in the HT department ? Thus transformer fits the existing mountings so would be ideal from that point of view.
|
|
|
