UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 22nd May 2018, 8:56 am   #1
Ambientnoise
Hexode
 
Join Date: Feb 2006
Location: Marlborough, Wiltshire, UK.
Posts: 314
Default Garrard circlip

Does anyone have a turntable retaining circlip (e-clip ?) to fit an SP25 mk3 ?

Tks

Ken
Ambientnoise is offline  
Old 23rd May 2018, 2:09 pm   #2
Ambientnoise
Hexode
 
Join Date: Feb 2006
Location: Marlborough, Wiltshire, UK.
Posts: 314
Default Re: Garrard circlip

As a follow up to this, I found that a standard 9.5mm (3/8) e-clip can be persuaded to fit by filing off the central pip and slightly flattening the two end lugs. Might help someone else.

Ken
Ambientnoise is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 7:12 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.