UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Repair and Restoration Services Wanted

Notices

Repair and Restoration Services Wanted If you need someone to repair or restore equipment for you please post your request here.

Reply
 
Thread Tools
Old 17th Oct 2022, 7:50 pm   #1
Chris55000
Nonode
 
Join Date: Aug 2007
Location: Walsall Wood, Aldridge, Walsall, UK.
Posts: 2,308
Default Racal 9081/9082/9915 Lever Switch Knobs can anyone 3D print some for me.

Looking at pictures of the various pieces of Racal T & M that use those little black lever switch knobs that always seem to get lost or broken off these units, is there any Member with a 3D Printer who could 3D print me a set of six for me from a dimensioned drawing, or from one of the originals as a pattern ?

(I'm not sure what material they would be, but possibly PLA or similar would do!)

Chris Williams
__________________
It's an enigma, that's what it is! This thing's not fixed because it doesn't want to be fixed!

Last edited by Chris55000; 17th Oct 2022 at 8:03 pm.
Chris55000 is offline   Reply With Quote
Old 23rd Oct 2022, 7:30 pm   #2
sobell1980
Octode
 
sobell1980's Avatar
 
Join Date: May 2011
Location: Bromyard, Herefordshire, UK.
Posts: 1,237
Default Re: Racal 9081/9082/9915 Lever Switch Knobs can anyone 3D print some for me.

If you have a drawing or one good original I could possibly help you out with 3D printing.
All the best
Dave
sobell1980 is offline   Reply With Quote
Old 26th Oct 2022, 10:55 am   #3
Chris55000
Nonode
 
Join Date: Aug 2007
Location: Walsall Wood, Aldridge, Walsall, UK.
Posts: 2,308
Default Re: Racal 9081/9082/9915 Lever Switch Knobs can anyone 3D print some for me.

Cheers Dave!

PM sent with details!

Chris Williams
__________________
It's an enigma, that's what it is! This thing's not fixed because it doesn't want to be fixed!
Chris55000 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 9:17 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.