BVWS NW Golborne swap meet 11th Nov - Page 2 - UK Vintage Radio Repair and Restoration Discussion Forum

Dave Moll · 31st Oct 2018, 4:47 pm

Thanks for clarifying that point.

AC/HL · 31st Oct 2018, 4:58 pm

Quote:

Originally Posted by Julianh

I'd like to ask about the Swapmeets.

This is your nearest one, post 1 answers most of your queries.

Paul Stenning · 31st Oct 2018, 9:05 pm

Quote:

Originally Posted by audiomagpie

The entry fee is strictly cash however, there will be no card machine at the door and we would loose too much in charges for the small amount charged for admission!

It would also take longer than cash which would slow the whole entry process down for everyone.

Really for an event like this, you should bring a reasonable amount of cash as most stallholders will only take cash.

David G4EBT · 6th Nov 2018, 6:48 pm

Looking forward to meeting a few forum friends and acquaintances on Sunday.

Kevin Hoyland · 7th Nov 2018, 8:33 am

Morning David.
I am looking forward to Sunday and seeing you and John.
Regards
Kevin.

60 oldjohn · 10th Nov 2018, 4:07 pm

Looking forwards to seeing you Kevin, I will have some FM to AM convertors for sale on my stall, one is reserved for you. Some have MP3 input as well as the FM radio input. As featured in the BVWS Bulletin Sumer 2017 by Guy Fernando.

John.

pbengtech · 10th Nov 2018, 4:32 pm

I sent off my form and cheque to book a stall at tomorrow’s Golborne swap meet, but have not received any tickets.
Shall I turn up tomorrow anyway with my BVWS membership card?
Many Thanks,
Phil Blundell.

HamishBoxer · 10th Nov 2018, 5:49 pm

I certainly would I am sure it will be fine.

Kentode · 10th Nov 2018, 8:47 pm

How about a preview of what you're bringing Phil?

audiomagpie · 10th Nov 2018, 8:54 pm

Phil, just turn up, no problem!

Look forward to seeing you all there!

Regards

Kentode · 11th Nov 2018, 4:52 pm

Just got back from yet another great Golborne meet!

Many thanks to the organisers, the stallholders and the venue staff for feeding us.

It was nice to speak to some familiar faces like Oldjohn (thanks for the am/fm tx), Keithstv, Ed_Dinning and Steve.

I also got to meet and thank Dave_G4EBT for the marvellous minimod and collected six radios and a record player from Steve (Colourstar).

BoaterSam, I'll see you at the auction in January. Good luck with the veneer and Bon Voyage!

See you all in April.

Richard_FM · 11th Nov 2018, 5:31 pm

It was my first event like this, & well worth the drive.

The 405 line sets were great to see in operation, & giving me a chance to hear the 10.125 kHz line whistle often mentioned here!

Boater Sam · 11th Nov 2018, 6:50 pm

Yes another great day out, some good sets found new homes, some not so good found me!

Unfortunately none of my bring and buy items sold so the car was a bit full again going home.
Despite being determined not to buy any more sets I was thwarted by one offered free and Mike Barker making me buy a McMichael 137 at a price I could not refuse.

Ken, I'll miss in January, will be 8000 miles away till end of March. Will be at Gnosall 17th and 18th of this month though.

Sam

Reelman · 11th Nov 2018, 7:04 pm

Another brilliant day out at Golborne, many thanks to all those who make it possible. Great to see some old friends and put faces to fellow forum members. Some really good bargains as well.
Unlike Sam above I was able to dispose of all I wanted to sell, in fact it was me who gave him the free one that he had to take home!

Roll on next April!
Hope you all arrived home safely.

Peter

David G4EBT · 11th Nov 2018, 7:07 pm

A great event as always!

Forum members were out in force and I was pleased to be able to exchange pleasantries with at least sixteen, including some with whom I was acquainted but hadn't met in person before, such as Ken 'Kentode', Geoff 'Murphy Maniac', 'RadioGraham' and Ed 'Johnny English'. It's always nice to be able to put a face to a name!

Many thanks to the stalwarts who work so hard to make these events possible - Mark Riding, Mike Barker, Jim, Greg Hewitt to name but a few, often travelling considerable distances involving an overnight stay, then a long drive home.

nutteronthebus · 11th Nov 2018, 7:41 pm

I was there and got an Avo 8 for £2 it has a faulty shunt resistor ( 450 Ohm) but other wise ok

Dave L

Duke_Nukem · 11th Nov 2018, 10:12 pm

I managed to scrounge a lift (cheers Greg!) and for the first time the M6 was not a nightmare.

A good selection of bits and bobs, and despite when the BVWS stall was being set up thinking "they'll never shift all that" pretty much everything went.

Didn't take away too much; a near immaculate Advance E2, mains cable chopped off, very wise as having opened it up I can see the mains cable rubber was - literally - shocking but in all other respects the rest of it immaculate.

Bought a few valves. Well, actually I bought some valve boxes that happened to have valves in them

for display purposes.

Also I rescued some Practical Television magazines (see separate offered thread).

_SO_ tempted by that thumping great GEC telly - it's just Nukem Towers is already creaking at the seams! I may yet still weaken ...

Talking of tellies, a nice display of tellies as ever and interesting to see someone had an 819 line set running, never seen one running before. Excellent picture, though to be honest not sure better than a good 405 set, at least on smaller screens.

But better than all that - the catering did good chips

TTFN,
Jon

Richard_FM · 11th Nov 2018, 11:34 pm

I did wonder what the survival rate for 819 sets are, as imagine similar things happened to them as 405 line sets here as people adopted 625 lines.

The picture looked great with the test cards, but it would have been great to see what a moving image would have looked like.

bobbyball · 12th Nov 2018, 12:28 am

Fantastic day out among like minded friends, never seen it so busy...

sexton_mallard · 12th Nov 2018, 12:40 am

Great day out and got to meet a few forum members. Came home with a selection of valves and other components but no sets. My rountoit queue has to be shorter! Many thanks to all who came and those who put the event together.

31st Oct 2018, 4:47 pm	#21
Dave Moll Dekatron Join Date: Feb 2005 Location: West Cumbria (CA13), UK Posts: 3,936	Re: BVWS NW Golborne swap meet 11th Nov Thanks for clarifying that point. __________________ Mending is better than Ending (cf Brave New World by Aldous Huxley)

6th Nov 2018, 6:48 pm	#24
David G4EBT Dekatron Join Date: Feb 2003 Location: Cottingham, East Yorkshire, UK. Posts: 3,470	Re: BVWS NW Golborne swap meet 11th Nov Looking forward to meeting a few forum friends and acquaintances on Sunday. __________________ David. BVWS Member. G-QRP Club member 1339.

7th Nov 2018, 8:33 am	#25
Kevin Hoyland Hexode Join Date: Feb 2009 Location: Rotherham, South Yorkshire, UK. Posts: 355	Re: BVWS NW Golborne swap meet 11th Nov Morning David. I am looking forward to Sunday and seeing you and John. Regards Kevin.

10th Nov 2018, 4:07 pm	#26
60 oldjohn Nonode Join Date: Dec 2004 Location: East Yorkshire, UK. Posts: 2,357	Re: BVWS NW Golborne swap meet 11th Nov Looking forwards to seeing you Kevin, I will have some FM to AM convertors for sale on my stall, one is reserved for you. Some have MP3 input as well as the FM radio input. As featured in the BVWS Bulletin Sumer 2017 by Guy Fernando. John. Last edited by 60 oldjohn; 10th Nov 2018 at 4:15 pm. Reason: Added last sentence

10th Nov 2018, 4:32 pm	#27
pbengtech Pentode Join Date: Jan 2009 Location: Birmingham, West Midlands, UK. Posts: 156	Re: BVWS NW Golborne swap meet 11th Nov I sent off my form and cheque to book a stall at tomorrow’s Golborne swap meet, but have not received any tickets. Shall I turn up tomorrow anyway with my BVWS membership card? Many Thanks, Phil Blundell.

10th Nov 2018, 5:49 pm	#28
HamishBoxer Dekatron Join Date: Aug 2007 Location: W.Butterwick, near Doncaster UK. Posts: 6,399	Re: BVWS NW Golborne swap meet 11th Nov I certainly would I am sure it will be fine. __________________ G8JET BVWS Member and V.M.A.R.S

10th Nov 2018, 8:47 pm	#29
Kentode Hexode Join Date: Mar 2015 Location: Todmorden, West Yorkshire, UK. Posts: 319	Re: BVWS NW Golborne swap meet 11th Nov How about a preview of what you're bringing Phil? __________________ Regards, Ken. BVWS member

10th Nov 2018, 8:54 pm	#30
audiomagpie Heptode Join Date: Apr 2003 Location: Rugby, Warwickshire, UK. Posts: 672	Re: BVWS NW Golborne swap meet 11th Nov Phil, just turn up, no problem! Look forward to seeing you all there! Regards __________________ Greg BVWS committee chairman

11th Nov 2018, 4:52 pm	#31
Kentode Hexode Join Date: Mar 2015 Location: Todmorden, West Yorkshire, UK. Posts: 319	Re: BVWS NW Golborne swap meet 11th Nov Just got back from yet another great Golborne meet! Many thanks to the organisers, the stallholders and the venue staff for feeding us. It was nice to speak to some familiar faces like Oldjohn (thanks for the am/fm tx), Keithstv, Ed_Dinning and Steve. I also got to meet and thank Dave_G4EBT for the marvellous minimod and collected six radios and a record player from Steve (Colourstar). BoaterSam, I'll see you at the auction in January. Good luck with the veneer and Bon Voyage! See you all in April. __________________ Regards, Ken. BVWS member

11th Nov 2018, 5:31 pm	#32
Richard_FM Heptode Join Date: Sep 2017 Location: Stockport, Cheshire, UK. Posts: 626	Re: BVWS NW Golborne swap meet 11th Nov It was my first event like this, & well worth the drive. The 405 line sets were great to see in operation, & giving me a chance to hear the 10.125 kHz line whistle often mentioned here! __________________ Beware of the trickster on the roof

11th Nov 2018, 6:50 pm	#33
Boater Sam Dekatron Join Date: Dec 2013 Location: Middlewich, Cheshire, UK. & Winter in the Philippines. Posts: 3,791	Re: BVWS NW Golborne swap meet 11th Nov Yes another great day out, some good sets found new homes, some not so good found me! Unfortunately none of my bring and buy items sold so the car was a bit full again going home. Despite being determined not to buy any more sets I was thwarted by one offered free and Mike Barker making me buy a McMichael 137 at a price I could not refuse. Ken, I'll miss in January, will be 8000 miles away till end of March. Will be at Gnosall 17th and 18th of this month though. Sam __________________ Boater Sam. BVWS Member

11th Nov 2018, 7:04 pm	#34
Reelman Heptode Join Date: Aug 2008 Location: Rotherham, South Yorkshire, UK. Posts: 723	Re: BVWS NW Golborne swap meet 11th Nov Another brilliant day out at Golborne, many thanks to all those who make it possible. Great to see some old friends and put faces to fellow forum members. Some really good bargains as well. Unlike Sam above I was able to dispose of all I wanted to sell, in fact it was me who gave him the free one that he had to take home! Roll on next April! Hope you all arrived home safely. Peter

11th Nov 2018, 7:07 pm	#35
David G4EBT Dekatron Join Date: Feb 2003 Location: Cottingham, East Yorkshire, UK. Posts: 3,470	Re: BVWS NW Golborne swap meet 11th Nov A great event as always! Forum members were out in force and I was pleased to be able to exchange pleasantries with at least sixteen, including some with whom I was acquainted but hadn't met in person before, such as Ken 'Kentode', Geoff 'Murphy Maniac', 'RadioGraham' and Ed 'Johnny English'. It's always nice to be able to put a face to a name! Many thanks to the stalwarts who work so hard to make these events possible - Mark Riding, Mike Barker, Jim, Greg Hewitt to name but a few, often travelling considerable distances involving an overnight stay, then a long drive home. __________________ David. BVWS Member. G-QRP Club member 1339.

11th Nov 2018, 7:41 pm	#36
nutteronthebus Hexode Join Date: Jun 2011 Location: Glossop, Derbyshire, UK. Posts: 310	Re: BVWS NW Golborne swap meet 11th Nov I was there and got an Avo 8 for £2 it has a faulty shunt resistor ( 450 Ohm) but other wise ok Dave L __________________ Any tool can be used as a hammer but a screwdriver makes the best chisel

11th Nov 2018, 10:12 pm	#37
Duke_Nukem Octode Join Date: Jan 2003 Location: Birmingham, West Midlands, UK. Posts: 1,152	Re: BVWS NW Golborne swap meet 11th Nov I managed to scrounge a lift (cheers Greg!) and for the first time the M6 was not a nightmare. A good selection of bits and bobs, and despite when the BVWS stall was being set up thinking "they'll never shift all that" pretty much everything went. Didn't take away too much; a near immaculate Advance E2, mains cable chopped off, very wise as having opened it up I can see the mains cable rubber was - literally - shocking but in all other respects the rest of it immaculate. Bought a few valves. Well, actually I bought some valve boxes that happened to have valves in them for display purposes. Also I rescued some Practical Television magazines (see separate offered thread). _SO_ tempted by that thumping great GEC telly - it's just Nukem Towers is already creaking at the seams! I may yet still weaken ... Talking of tellies, a nice display of tellies as ever and interesting to see someone had an 819 line set running, never seen one running before. Excellent picture, though to be honest not sure better than a good 405 set, at least on smaller screens. But better than all that - the catering did good chips TTFN, Jon

11th Nov 2018, 11:34 pm	#38
Richard_FM Heptode Join Date: Sep 2017 Location: Stockport, Cheshire, UK. Posts: 626	Re: BVWS NW Golborne swap meet 11th Nov I did wonder what the survival rate for 819 sets are, as imagine similar things happened to them as 405 line sets here as people adopted 625 lines. The picture looked great with the test cards, but it would have been great to see what a moving image would have looked like. __________________ Beware of the trickster on the roof

12th Nov 2018, 12:28 am	#39
bobbyball Moderator Join Date: Jul 2011 Location: Stockport, Greater Manchester Posts: 1,074	Re: BVWS NW Golborne swap meet 11th Nov Fantastic day out among like minded friends, never seen it so busy... __________________ Robert

12th Nov 2018, 12:40 am	#40
sexton_mallard Pentode Join Date: Sep 2013 Location: Ellesmere, Shropshire, UK. Posts: 235	Re: BVWS NW Golborne swap meet 11th Nov Great day out and got to meet a few forum members. Came home with a selection of valves and other components but no sets. My rountoit queue has to be shorter! Many thanks to all who came and those who put the event together. __________________ Dom BVWS member Last edited by sexton_mallard; 12th Nov 2018 at 12:46 am.