|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
12th Sep 2022, 7:51 am | #1 |
Diode
Join Date: Sep 2022
Location: Münster, Germany
Posts: 2
|
Batego 48 EPROM Programmer.
Hi,
do any of you have any experience with a Batego 48? I need to reprogram my pinball machine. Does it work with current systems? Thanks, Victor. Last edited by Station X; 12th Sep 2022 at 8:03 am. Reason: Post moved to a new thread. |
12th Sep 2022, 8:32 am | #2 |
Dekatron
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 11,556
|
Re: Batego 48 EPROM Programmer.
Hello Victor.
Is this your programmer? https://www.batronix.com/shop/programmer/BX48/ And what is the device number of the chip you need to reprogram in your pinball machine? |
12th Sep 2022, 3:48 pm | #3 |
Octode
Join Date: May 2009
Location: Linkoping, Sweden
Posts: 1,465
|
Re: Batego 48 EPROM Programmer.
The people at Batronix are very helpful so you can direct your question directly to them at service@batronix.com .
I've had superb help when I have asked them for support and they have even made special files to download for me for use with their programmers when I have had special needs.
__________________
Martin, Sweden |
12th Sep 2022, 3:58 pm | #4 |
Dekatron
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 11,556
|
Re: Batego 48 EPROM Programmer.
If the programmer linked to in #2 is the one that Victor has then its support software would appear to be "Prog-Express", which is here and appears to support all current OSes.
https://www.batronix.com/shop/softwa...ess/index.html The next question would be, what type of device does Victor need to program? |