UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 3rd Nov 2003, 12:26 pm   #1
tinker
Guest
 
Posts: n/a
Default Bush TR82C etc case repairs

As Hammerite brush cleanerand thinner is a solvent for the material from which these cases are constructed it is possible to do "weld" repairs. eg the chips missing from the backs can be replaced by removing pieces from the locating "fence" that runs around the inside of the back and welding them into their new position using the thinner on an artists paint brush. DO THIS IN THE FRESH AIR!

Last edited by Paul Stenning; 26th Dec 2004 at 11:57 pm. Reason: Fix link or code for vBulletin
 
Old 3rd Nov 2003, 1:53 pm   #2
joe
Rest in Peace
 
joe's Avatar
 
Join Date: Apr 2003
Location: Edgware, North London.
Posts: 307
Default Re: Bush TR82C etc case repairs

Another useful solvent is the stuff used for glueing plastic drain pipes, particularly the one made by Osma.

The resulting weld is every bit as strong as the original, but one word of warning, usually if you get an adhesive such as Araldite where you don't want it you can wipe it off before it sets. These solvent cements are absolutely unforgiving and will mark any surface instantly. Any attempt to wipe it off will only make matters worse.

Unfortunately they will not work on bakelite.

Joe
joe is offline  
Old 5th Nov 2003, 2:02 pm   #3
Neil F
Pentode
 
Neil F's Avatar
 
Join Date: Oct 2003
Location: Leicester, UK.
Posts: 143
Default Re: Bush TR82C etc case repairs

A less useful solvent is RS sticky label remover. Don't use this on your TR82 unless you want to turn a patch of nice, smooth plastic into imitation lizard-skin. Trust me, I know what I'm talking about!
__________________
Neil F.
www.vintage-vet.co.uk
Neil F is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 3:06 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.