UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 29th Jan 2004, 11:38 pm   #1
Amanda_H
Guest
 
Posts: n/a
Default Straightening Variable capacitor vanes

Hi There,

Being in the position of having dropped a variable capacitor and bent the frame I had the job of straightening up the vanes on the rotor.

Fortunately AOL came to my rescue, or one of their Cd's did!

I found that the cd with the circular ridge towards the centre filed off was the exact thickness to fit snugly between the vanes, I cut out a 90 degree section of the disc using a sharp pair of scissors and it made straightening the vanes up much easier.

Regards to all

Amanda
 
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:14 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.