UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms

Notices

Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Closed Thread
 
Thread Tools
Old 20th Nov 2018, 1:12 am   #1
Jakemm06
Retired Dormant Member
 
Join Date: Nov 2018
Location: Winchester, Hampshire, UK.
Posts: 1
Default Help required with GPO 300 Mark 1 (won’t hang up)

Hello all,
Today I rewired my GPO 300 Mark 1 to the BT fitting. I can dial out ok but when I put down the hand set it doesn’t hang up. It just plays the dial tone quieter. Any ideas what may be causing this? I’ve checked the contacts and they are broken when the receiver is down.
Any help is very much appreciated!

Martin
Jakemm06 is offline  
Old 20th Nov 2018, 12:33 pm   #2
ThePillenwerfer
Octode
 
ThePillenwerfer's Avatar
 
Join Date: Mar 2011
Location: Sheffield, South Yorkshire, UK.
Posts: 1,453
Default Re: Help required with GPO 300 Mark 1 (won’t hang up)

A picture of the terminal block would help greatly.
ThePillenwerfer is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 7:41 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.