UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Audio (record players, hi-fi etc)

Notices

Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment.

Reply
 
Thread Tools
Old 12th Feb 2019, 12:20 pm   #21
'LIVEWIRE?'
Dekatron
 
'LIVEWIRE?''s Avatar
 
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 6,378
Default Re: BSR UA8 tonearm problem

I have already done that, Edward -it's connected to a chassis tag under a bolt in the metal chassis.
'LIVEWIRE?' is offline   Reply With Quote
Old 12th Feb 2019, 11:17 pm   #22
Armbored
Tetrode
 
Join Date: Nov 2015
Location: Aberdeen, UK.
Posts: 64
Default Re: BSR UA8 tonearm problem

Quote:
Originally Posted by Edward Huggins View Post
Yes, they used twisted wires as it was cheaper, but usually quite effective. Connect the yellow/green mains earth wire to a good solid point on the metal chassis of the amplifier.
Livewire, I think Edward's comment about the earthing was meant for me?
Armbored is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 5:19 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.