|
Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
|
Thread Tools |
21st Feb 2021, 6:29 am | #1 |
Heptode
Join Date: Jan 2007
Location: Parkes, NSW Australia
Posts: 877
|
Newmarket miniature audio amplifier AC2
I wonder if anyone has drawn up a schematic for this little amplifier board.
|
21st Feb 2021, 12:15 pm | #2 |
Dekatron
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,536
|
Re: Newmarket miniature audio amplifier AC2
Do you mean PC2.
If so, there's some useful info here: https://www.vintage-radio.net/forum/...ad.php?t=66460 The Wylie guy was very helpful back in 2011, too.
__________________
....__________ ....|____||__|__\_____ .=.| _---\__|__|_---_|. .........O..Chris....O |
21st Feb 2021, 12:50 pm | #3 |
Octode
Join Date: Aug 2008
Location: Rayleigh near Southend-On-Sea, Essex, UK.
Posts: 1,883
|
Re: Newmarket miniature audio amplifier AC2
Hi,
If it helps I've scanned and attached the data sheet for the PC.4. It has the circuit but no values, however looking at the previous post the values of the PC2 are on the diagram NKT_PC2.JPG I've the PC.3, PC.4 and S13 in the modules box. Looking at these it appears to use the same basic PCB and circuit and each one changed to give different gain, input and output sensitivities and impedances etc. Edit..... was a Newmarket module used in the Discatron or am I barking up the wrong tree, which I suspect I am! Regards Terry Last edited by Valvepower; 21st Feb 2021 at 12:55 pm. Reason: Add something |
22nd Feb 2021, 8:08 am | #4 |
Heptode
Join Date: Jan 2007
Location: Parkes, NSW Australia
Posts: 877
|
Re: Newmarket miniature audio amplifier AC2
Thanks, chaps. Senior moment I'm afraid. turns out the board I have is the PC1 mini audio amplifier.
|