|
|
|
|
|||||||
| Where To Get Sets and Parts For discussions about swapmeets, rallies, NVCF and BVWS, car boot sales, antique and charity shops, dealers, newspaper adverts, the local tip and just about any other source of equipment (other than eBay). |
 |
|
|
Thread Tools |
2nd Mar 2021, 8:43 pm
|
#1 |
|
Hexode
Join Date: Jun 2012
Location: Chester, Cheshire, UK.
Posts: 370
|
Roberts R200 Handle retaining clips
Evening all.
Does anyone know what the proper name is for the little round springy push on clips that retain the handle pins on the R2000/300/500 ) in fact most Roberts radios from the early 60s)? I've searched for spire clips but these tend to be rectangular and accept a self tapper. Any help as to what they're called and/or a source would be greatly appreciated. Thanks Rob |
|
|
|
2nd Mar 2021, 10:44 pm
|
#2 |
|
Pentode
Join Date: Jan 2019
Location: Manchester, UK.
Posts: 101
|
Re: Roberts R200 Handle retaining clips
Starlock washer?
|
|
|
|
|
3rd Mar 2021, 9:19 pm
|
#3 |
|
Hexode
Join Date: Jun 2012
Location: Chester, Cheshire, UK.
Posts: 370
|
Re: Roberts R200 Handle retaining clips
I've looked at starlock washers, they are similar but have too many fingers. They may be my only option though. Time to get the digital callipers out !
|
|
|
|
|
4th Mar 2021, 7:10 pm
|
#4 |
|
Heptode
Join Date: Jan 2009
Location: West Lothian, UK.
Posts: 562
|
Re: Roberts R200 Handle retaining clips
I don't know the Roberts but - perhaps something from/for a car? e.g.
https://bresco.com/acatalog/Round--r...95P.html#SID=2
__________________
George |
|
|
|
4th Mar 2021, 7:57 pm
|
#5 |
|
Octode
Join Date: May 2004
Location: Halifax, West Yorkshire, UK.
Posts: 1,846
|
Re: Roberts R200 Handle retaining clips
You might find the PDF attached to this post interesting:
https://www.vintage-radio.net/forum/...93&postcount=1 Alan |
|
|
|
