UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Closed Thread
 
Thread Tools
Old 16th Apr 2018, 10:17 am   #1
Merlimont
Retired Dormant Member
 
Join Date: Apr 2018
Location: Oxford, Oxfordshire, UK.
Posts: 3
Default Crosley identification

Hi All,

New member here and radio newbie too.

My grandfather was a tank radio operator in the war and carried on in that vein after, becoming an electrician in the Dales installing and fixing new fangled TVs and radios.

Unfortunately he recently died and I asked for a few of his old radio sets that always fascinated me in the garage. I'd love to get them fired up again and back in use. I have no idea what state they are in but know better than to whack a plug on and hope for the best.

One of them has the name plate and is a GEC 4835r, but the Crosley doesn't seem to have a plate on it. It's in need of some serious love!

I've trawled through the web and can't seem to find a match.
It seems to be around 1934-8 based on the style I've seen on here: http://www.crosleyradios.com/5m3deco.html the art deco style and knobs seem similar.

Anyway I have his old multimeter, so will be going through the site for an idiots guide to getting started!

https://farm1.*****************/883/3...ecf8b46f_b.jpg Crosley front

https://farm1.*****************/819/2...3cbe1e38_b.jpg Crosley back

https://farm1.*****************/880/4...73476e86_h.jpg Crosley gubbins

https://farm1.*****************/796/2...432a035b_h.jpg Crosley gubbins

https://farm1.*****************/794/2...c676728f_h.jpg GEC 4835r


Paul
Merlimont is offline  
Old 16th Apr 2018, 11:19 am   #2
Cobaltblue
Moderator
 
Cobaltblue's Avatar
 
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,823
Default Re: Crosley identification

Hi Paul

Your Crosley is possibly this one

https://www.radiomuseum.org/r/crosle...derne_182.html

Cheers

Mike T

Oh and welcome to the forum
__________________
Invisible airwaves crackle with life or at least they used to
Mike T BVWS member.
www.cossor.co.uk

Last edited by Cobaltblue; 16th Apr 2018 at 11:21 am. Reason: added welcome
Cobaltblue is online now  
Old 16th Apr 2018, 11:48 am   #3
Merlimont
Retired Dormant Member
 
Join Date: Apr 2018
Location: Oxford, Oxfordshire, UK.
Posts: 3
Default Re: Crosley identification

Great stuff thanks! Should've posted this to the experts earlier instead of wasting my time trawling round the net.

Some good info there.
Merlimont is offline  
Old 16th Apr 2018, 12:21 pm   #4
ms660
Dekatron
 
ms660's Avatar
 
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
Default Re: Crosley identification

There's a schematic for Crosley 182 here:

http://www.nostalgiaair.org/pagesbym...1/M0003311.pdf

Note that the schematic shows that in it's original form it was for 117 volt operation and it used a line cord for the heater dropper, and that one side of the mains was not connected direct to chassis but connected to chassis via a capacitor (19) and the HT choke (42) and that the DC voltage measurements given were measured with the reference to the HT -ve rail.

Lawrence.

Last edited by ms660; 16th Apr 2018 at 12:40 pm. Reason: addition/clarification
ms660 is offline  
Old 16th Apr 2018, 12:30 pm   #5
Cobaltblue
Moderator
 
Cobaltblue's Avatar
 
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,823
Default Re: Crosley identification

Hi Paul

There is some reading here

https://www.vintage-radio.com/repair...ion/index.html

Feel free to ask questions but bear in mind these sets are what are loosley described as Live chassis models.

These need more care when working on them due to the increased potential for shock, not really ideal for a first restoration.

However Paul Stenning's excellent guides discuss this.

Cheers

Mike T
__________________
Invisible airwaves crackle with life or at least they used to
Mike T BVWS member.
www.cossor.co.uk
Cobaltblue is online now  
Old 16th Apr 2018, 7:45 pm   #6
Merlimont
Retired Dormant Member
 
Join Date: Apr 2018
Location: Oxford, Oxfordshire, UK.
Posts: 3
Default Re: Crosley identification

Thanks all.

I'll start on the cabinet, there are a couple of restorations online, so will look at those as well as tips on here.

Will tackle the rest after a lot more research! I understand there is a big box of valves too, so could come in handy.
Merlimont is offline  
Old 16th Apr 2018, 8:49 pm   #7
MurphyNut
Heptode
 
MurphyNut's Avatar
 
Join Date: Apr 2016
Location: Croxley Green, Hertfordshire, UK.
Posts: 979
Default Re: Crosley identification

Not much mention of the pretty GEC set from 1947.
These are lovely radios and certainly a lot less common than a Bush Dac 90 that came out at a similar time.
__________________
Clive
MurphyNut is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 7:52 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.