UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Other Vintage Household Electrical or Electromechanical Items

Notices

Other Vintage Household Electrical or Electromechanical Items For discussions about other vintage (over 25 years old) electrical and electromechanical household items. See the sticky thread for details.

Closed Thread
 
Thread Tools
Old 15th Jul 2017, 8:51 pm   #1
ricksteptoe
Pentode
 
Join Date: Apr 2010
Location: Norwich, Norfolk, UK.
Posts: 136
Default Kirby Heritage 2HE

Hi all,
could anybody give me a couple of pointers re the above? I picked it up from the auction this morning, and on testing later worked fine. After fitting the brush belt it was totally dead in the motor department, the neon in the motor housing comes on with the foot switch, so the power is getting in, but no smoke, no hum, no nothing!

Is there a known fault I should be looking for, rather than stripping the whole thing down. During earlier test there was no hesitation or intermittency to suggest a bad connection or fractured wire, so am at a loss.

Thanks in anticipation,

Rick
ricksteptoe is offline  
Old 16th Jul 2017, 12:41 am   #2
rambo1152
Heptode
 
rambo1152's Avatar
 
Join Date: May 2010
Location: Manchester, UK.
Posts: 632
Default Re: Kirby Heritage 2HE

Check continuity to the motor, then look at the brushes
Motor brushes often give out one last swansong like that.
Looks like a 10 min job
https://www.youtube.com/watch?v=Rkraf8BhyX0
WARNING scary video
rambo1152 is online now  
Old 16th Jul 2017, 3:14 pm   #3
keithinuk
Pentode
 
Join Date: Mar 2011
Location: Hertfordshire, UK.
Posts: 205
Default Re: Kirby Heritage 2HE

I would say its not the brushes.

Is there a known fault

Not as such, If it has the same setup as the Classic, you will find a multi lead switch low down at the front of the motor, behind the beater attachment, this can be fragile, cracked or may have moved, plus if an attachment is not fitted perfectly, IE beater head and so on, it will not work, the Kirby will light up but the motor will not work.
The switch can be problematic, being so low to the ground and plastic It can be a problem, look at this first.

I have two Kirby classics and I also have a backup motor, you never know.
keithinuk is offline  
Old 16th Jul 2017, 6:50 pm   #4
ricksteptoe
Pentode
 
Join Date: Apr 2010
Location: Norwich, Norfolk, UK.
Posts: 136
Default Re: Kirby Heritage 2HE

Thanks for the information, I'll check it out, and report back.

Regards,

Rick.
ricksteptoe is offline  
Old 13th Oct 2017, 7:09 pm   #5
ricksteptoe
Pentode
 
Join Date: Apr 2010
Location: Norwich, Norfolk, UK.
Posts: 136
Default Re: Kirby Heritage 2HE

So sorry for the delay in replying, but the vac got sidelined, not least by health problems.

Anyway, it seems this model has some sort of interlock on the lamp housing which kills the motor. Needless to say on my machine it was intermittent, but smacking the housing firmly after fitting the belt for the seventeenth time sorted the problem, and it is now working! Not as nice as a proper pre-war Hoover junior, but I'm not the end user. Somehow my sister isn't as impressed with old stuff as I am.

Thanks to all who responded.

Mods, this can now be closed.

Regards,

Rick.
ricksteptoe is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 4:16 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.