UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment
Reload this Page Current Probe Model PR200
Register FAQ Forum Rules Calendar

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 15th Jun 2013, 2:47 pm   #1
jimmc101
Heptode
 
jimmc101's Avatar
 
Join Date: Mar 2009
Location: Portsmouth, Hampshire, UK.
Posts: 674
Default Current Probe Model PR200
Does anyone have a circuit for this device?
I used mine with a 'scope for the first time today (I normally use a meter) and found that it was 'hooting' at around 1MHz on the 200A range.

Jim
jimmc101 is offline  
Closed Thread

« Previous Thread | Next Thread »



All times are GMT +1. The time now is 5:25 am.

Contact Us - Home - Forum Rules, Privacy & Disclaimer - Top

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.