|
Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets. |
|
Thread Tools |
17th Nov 2021, 4:22 pm | #1 |
Dekatron
Join Date: Sep 2003
Location: Near Swindon, North Wiltshire, UK.
Posts: 3,623
|
Mystery 2 pin connector to identify
These were amongst a job lot of bits and pieces that I recently acquired.
Does anyone know what they are called and their main application(s)? |
17th Nov 2021, 4:31 pm | #2 |
Nonode
Join Date: Jan 2010
Location: North Somerset, UK.
Posts: 2,130
|
Re: Mystery 2 pin connector to identify
Possibly home made, for connection to dry batteries that had a socket outlet, AD 28, HP 1, and various HT batteries.
|
17th Nov 2021, 7:24 pm | #3 |
Dekatron
Join Date: Nov 2011
Location: Surrey, UK.
Posts: 4,400
|
Re: Mystery 2 pin connector to identify
The Paxolin circle is reminiscent of a fluorescent light starter contact plate- perhaps, as broadgage says, it was adapted for battery contact use.
|
17th Nov 2021, 7:36 pm | #4 |
Nonode
Join Date: Jun 2007
Location: Coulsdon, London, UK.
Posts: 2,171
|
Re: Mystery 2 pin connector to identify
Another possibility is the type of plug used for headphones in the crystal set era.
I assume that the two holes in the paxolin are a crude form of cable grip. Alternatively a loop of cord could be attached to help to unplug it. |
17th Nov 2021, 7:48 pm | #5 |
Moderator
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,880
|
Re: Mystery 2 pin connector to identify
How big is it?
Its not dissimilar to the power connector so beloved by Bush on DAC90s and similar sets if its that sort of size Cheers Mike T
__________________
Invisible airwaves crackle with life or at least they used to Mike T BVWS member. www.cossor.co.uk |
17th Nov 2021, 7:58 pm | #6 |
Dekatron
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 14,010
|
Re: Mystery 2 pin connector to identify
The two holes at 90-degrees to the pins suggest they could have been for the connecting flex to feed through as a kind of strain-relief for the flex-to-pin connections.
I'd think it was a battery-connector, or maybe used to connect an extension-speaker to a radio.
__________________
I'm the Operator of my Pocket Calculator. -Kraftwerk. |
17th Nov 2021, 8:22 pm | #7 |
Dekatron
Join Date: Sep 2003
Location: Near Swindon, North Wiltshire, UK.
Posts: 3,623
|
Re: Mystery 2 pin connector to identify
I should have added a ruler in my previous photos to give some idea of size. Here’s one now.
My digital micrometer says the pins are 1.97 mm diameter. I doubt it was for HT or LT battery connections, as the two pins are the same diameter, so not polarised. Still intrigued as to its use(s). |
24th Nov 2021, 2:21 pm | #8 |
Nonode
Join Date: Jan 2010
Location: North Somerset, UK.
Posts: 2,130
|
Re: Mystery 2 pin connector to identify
Possibly a battery connector despite not being polarised.
Incorrect polarity of the heater supply seldom matters, and HT could be determined by trial end error without harm, as when connecting a valve set to DC mains. |
24th Nov 2021, 10:51 pm | #9 |
Nonode
Join Date: Oct 2010
Location: Tintinara, South Australia, Australia
Posts: 2,343
|
Re: Mystery 2 pin connector to identify
Antenna/earth connector or speaker connector as already mentioned?
|